KitchenAid W10440551A Moving the Range, For power supply cord-connected ranges

Moving the Range

WARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Install anti-tip bracket to floor or wall per installation instructions.

Slide range back so rear range foot is engaged in the slot of the anti-tip bracket.

Re-engage anti-tip bracket if range is moved.

Do not operate range without anti-tip bracket installed and engaged.

Failure to follow these instructions can result in death or serious burns to children and adults.

When moving range, slide range onto cardboard or hardboard to avoid damaging the floor covering.

If removing the range is necessary for cleaning or maintenance:

For power supply cord-connected ranges:

1.Using two or more people, slide range onto cardboard or hardboard to perform cleaning or maintenance.

2.Unplug the power supply cord.

3.Perform cleaning or maintenance.

4.Plug in range.

5.Check that anti-tip bracket is installed:

■Look for the anti-tip bracket securely attached to floor or wall.

■Slide range back so rear range foot is under anti-tip bracket.

For direct-wired ranges:

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

1.Disconnect power.

2.Using two or more people, slide range onto cardboard or hardboard to perform cleaning or maintenance.

3.Disconnect wiring (if necessary).

4.Perform cleaning or maintenance.

5.Reconnect wiring (if necessary). See “Electrical Connection - U.S.A. Only” section.

6.Check that anti-tip bracket is installed:

■Look for the anti-tip bracket securely attached to floor or wall.

■Slide range back so rear range foot is under anti-tip bracket.

7.Check that range is level and reconnect power.

6.Check that range is level.

15