KitchenAid W10440551A Installation Requirements, Tools and Parts, Location Requirements

Page 4

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Tools needed

■

Tape measure

■

Masking tape

■

Flat-blade screwdriver

■

¼" nut driver

■

Level

■

⁵⁄₁₆" nut driver

■

Hammer

■

¹⁄₈" (3.2 mm) drill bit (for

■ Hand or electric drill

 

wood floors)

 

³⁄₁₆" (4.8 mm) carbide-tipped

■

Wrench or pliers

■

 

masonry drill bit (for

 

 

 

■

Marker or pencil

 

concrete/ceramic floors)

Parts supplied

Check that all parts are included.

A

B

A.Anti-tip bracket

B.#12 x 1⁵⁄₈" screws

■Anti-tip bracket must be securely mounted to subfloor or wall. Thickness of flooring may require longer screws to anchor bracket to subfloor. Longer screws are available from your local hardware store.

Parts needed

If using a power supply cord:

■A UL listed power supply cord kit marked for use with ranges. The cord should be rated at 250 volts minimum, 40 amps or 50 amps that is marked for use with nominal 1³⁄₈" (3.5 cm) diameter connection opening and must end in ring terminals or open-end spade terminals with upturned ends.

■A UL listed strain relief.

Check local codes. Check existing electrical supply. See “Electrical Requirements” section.

It is recommended that all electrical connections be made by a licensed, qualified electrical installer.

Rear Filler Strip (optional)

The rear filler strip may be used to fill a gap between the rear of the slide-in cooktop and the wall in a freestanding cutout.

A

B

B

C

A. Rear filler strip

B.Countertop

C.Countertop cutout

Please reference the “Assistance or Service” section of the Use and Care Guide to order.

Black - W10113902A

White - W10113903A

Biscuit - W10113904A

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.

■It is the installer’s responsibility to comply with installation clearances specified on the model/serial rating plate. The model/serial rating plate is located inside the oven door on the right-hand side oven door trim.

■The range should be located for convenient use in the kitchen.

■To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a range hood or microwave range hood combination that projects horizontally a minimum of 5" (12.7 cm) beyond the bottom of the cabinets.

■Cabinet opening dimensions that are shown must be used. Given dimensions are minimum clearances.

■The anti-tip bracket must be installed. To install the anti-tip bracket shipped with the range, see “Install Anti-Tip Bracket” section.

■Grounded electrical supply is required. See “Electrical Requirements” section.

IMPORTANT: To avoid damage to your cabinets, check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate or sustain other damage. This oven has been designed in accordance with the requirements of UL and CSA International and complies with the maximum allowable wood cabinet temperatures of 194°F (90°C).

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents W10440551A Table of Contents Table DES MatièresRange Safety Your safety and the safety of others are very importantTools and Parts Installation RequirementsLocation Requirements Mobile Home Additional Installation Requirements Product Dimensions Freestanding RangeMobile home installations require Slide-in RangeElectrical Requirements U.S.A. Only Cabinet DimensionsElectrical Connection If connecting to a 3-wire system If connecting to a 4-wire systemElectrical Requirements Canada Only Installation Instructions Countertop PreparationUnpack Range Measure for Proper HeightInstall Anti-Tip Bracket Adjust Leveling LegsFreestanding Ranges Power Supply Cord Direct WireElectrical Connection U.S.A. Only Floor MountingStyle 1 Power supply cord strain relief Style 2 Direct wire strain reliefWire connection Power Supply Cord Direct Wire Installation Copper or Aluminum Wire Wire Connection Direct WireComplete Installation Verify Anti-Tip Bracket Is Installed EngagedLevel Range For direct-wired ranges For power supply cord-connected rangesMoving the Range Page Page Sécurité DE LA Cuisinière Votre sécurité et celle des autres est très importanteExigences demplacement Exigences DinstallationOutillage et pièces Dimensions du produit Cuisinière autoportante Cuisinière encastrableDimensions du placard RemarqueSpécifications électriques Préparation du plan de travailInstructions Dinstallation Déballage de la cuisinièreMesures pour une hauteur appropriée Cuisinières autoportantesInstallation de la bride antibasculement Ajuster les pieds de nivellementMontage mural Montage au plancher Sur les modèles avec tiroir-réchaudSur les modèles avec tiroir de remisage Achever linstallation Déplacement de la cuisinièreRéglage de laplomb de la cuisinière Cuisinières alimentées par cordon d’alimentationPour les cuisinières avec câblage direct 11/11

W10440551A specifications

The KitchenAid W10440551A is a notable kitchen accessory that has garnered attention for its quality and functionality. Designed with a perfect blend of style and performance, this product features a robust construction that ensures durability and longevity, making it an ideal companion for any home chef.

One of the standout features of the KitchenAid W10440551A is its versatility. It is not merely a single-use appliance but a multi-functional tool that can assist with a variety of cooking tasks. Whether you’re mixing, kneading, or whipping, this product can handle it all, making it an essential addition to any kitchen. The user-friendly design allows for effortless operation, even for those who are new to cooking.

In terms of technology, the W10440551A incorporates advanced mechanisms that enhance user experience. The powerful motor is designed to provide consistent performance, ensuring that you achieve the desired results every time. Additionally, the product features several speed settings, allowing you to adjust the mixing intensity according to your specific needs. This level of customization makes it suitable for a range of recipes, from delicate meringues to heavy bread doughs.

Another impressive aspect of the KitchenAid W10440551A is its ergonomic design. The appliance is crafted for comfort and ease of use, with controls that are both intuitive and accessible. A well-placed handle ensures that pouring and transferring mixtures is a straightforward task, reducing the likelihood of spills and messes.

The product also includes various attachments that enhance its functionality further. From dough hooks to whisk attachments, these accessories allow users to expand their culinary capabilities without the need for additional appliances cluttering the kitchen counter.

Moreover, the KitchenAid W10440551A is designed with safety in mind. It features a secure locking mechanism that keeps the bowl in place during operation, preventing any accidental spills or accidents.

Finally, the aesthetic appeal of the KitchenAid W10440551A cannot be overlooked. Available in multiple colors, this appliance can seamlessly blend into any kitchen décor, adding a stylish touch to your culinary space.

In summary, the KitchenAid W10440551A stands out for its versatility, user-centric design, and robust performance, making it an indispensable tool for modern kitchens. Whether you are a novice cook or a seasoned chef, this appliance is sure to elevate your cooking experience.
Top Page Image Contents