KitchenAid BRIVA, KIDS36EP ChangingaCycle or Setting, CancelingaCycle, AddingItems DuringaCycle

Normal									ChangingaCycle or Setting
Use this cycle for loads with normal amounts of food soil. (The
									During the first fill of a cycle
energy-usage label is based on this cycle.)
								1.	Open the lid.
Main	Rinse	Purge†	Rinse	Final	Dry	Time	Water
Wash				Heated		(min)	Usage	2.	Press a new cycle and/or options.
				Rinse			(gal/L)
								3.	Check the detergent. Dishwasher must contain the proper
●	●	●	●	●	●	37*	4.1/		amount for the new cycle.
145°F				145°F			15.7	4.	Close and latch the lid. The dishwasher resumes the new
(61°C)				(61°C)
									cycle and/or option after a 5-second pause.

Quick Wash

Use this cycle for light loads, light soil or glassware.

Main	Rinse	Final	Dry	Time	Water
Wash		Heated		(min)	Usage
		Rinse			(gal/L)
●	●	●	●	21*	2.5/9.5
145°F		145°F
(61°C)		(61°C)

Rinse Only

Use this rinse cycle for rinsing dishes, glasses, and silverware that will not be washed right away.

Do not use detergent with this cycle.

Main	Rinse	Final	Dry	Time	Water
Wash		Heated		(min)	Usage
		Rinse			(gal/L)
	●			3	0.9/3.5

†A small amount of water is run through the pump to remove soil particles.

CancelingaCycle

Anytime during a cycle, open the lid. Then press CANCEL and close the lid.

The dishwasher starts a drain. Let the dishwasher drain completely. Select a new cycle.

To stop the drain

You can press CANCEL again to stop the drain immediately. Remember to drain the dishwasher before starting a new cycle.

To clear the indicators

Press CANCEL before starting the dishwasher to clear all options and cycles.

After the first fill of a cycle

1.Open the lid.

2.Press the Cancel pad.

3.Close the lid. Your dishwasher starts a drain. Let the dishwasher drain completely.

4.Open the lid.

5.Select a new cycle and/or options.

6.Check the detergent. Dishwasher must contain the proper amount for the new cycle.

7.Press the Start pad.

8.Close and latch the lid.

AddingItems DuringaCycle

You can add an item anytime before the main wash starts. Open the lid and check the detergent amount. If the detergent is still visible, you can add items.

To add items

1.Turn the knob latch to stop the cycle. Wait for the spraying action to stop before opening the lid completely.

2.Open the lid. If the detergent is still visible in the wash water, you may add the item.

3.Close the lid firmly and turn knob to latch. The dishwasher resumes the cycle after a 5-second pause.

Option Selections

You can customize your cycles by pressing the SANI RINSE™ option. If you change your mind, press the option again to turn the option off.

You can change an option anytime before the selected option begins.

Press the Start pad to repeat the same cycle and option as the previous wash cycle.

NOTE: If the last cycle you completed was a rinse cycle, when you press the Start pad, the dishwasher runs the last full wash cycle and option.

SANI RINSE™ Option

Select this option to raise the water temperature in the final rinse to approximately 160°F (71°C). The SANI RINSE™ option adds heat and time to the cycle.

NOTE: SANI RINSE™ is an option with the Pots/Pans, Normal, and Quick Wash cycles.

11