Connecting Antenna, Locating a Title

Radio signals may be difficult to receive in

some buildings and under certain conditions.

The provided antennas will help in their reception.

They are intended for indoor use only.

AM Loop Antenna

The placement of the AM loop antenna should

be in a direction that provides the clearest reception. Keep as far as possible from DVD receiver, TV set, and speaker and power cords. If reception remains poor, an outdoor antenna may be necessary.

To connect the AM loop antenna: 1.Hold down handle 2.Insert wire end into hole 3.Release handle

Position for best reception

CONNECTING ANTENNA

FM Indoor Antenna

The FM antenna should be fully extended and in a direction that provides the clearest signal. Secure the antenna ends in a location where distortion is a minimum. If reception remains poor, an outdoor antenna may be necessary.

To connect the FM antenna:

1.Open cable terminal by pressing back on tab 2.Insert wire end

3.Release tab; make sure wire is in terminal securely

FUNCTIONS

N/P

This DVD receiver supports video output of

various systems, including auto, NTSC, and PAL. The picture will blink and become colourless when the wrong system is selected. If this occurs, press the N/P key on the remote control, then select the correct system (NTSC for North America, PAL for Europe). For more information on output format, refer to the TV set's manu- facturer's instructions.

Subtitles

The unit has the capability to display subtitles

in any of 32 different languages.

1. Press the SUBTITLE key. The subtitle menu will appear. Select the desired language by pressing the SUBTITLE key.

SUBTITLE 02/08 ENGLISH

SUBTITLE

2.To remove the subtitles from view, press the SUBTITLE key until they disappear.

SUBTITLE OFF

Language

The unit has the capability to show movies in

one of eight languages.

1.Press the LANGUAGE key. The language menu will appear. Select the desired language by pressing the LANGUAGE key.

LANGUAGE

AUDIO 1/8 AC-3 2CH ENGLISH

Note: The disc being played must be multi-lan- guage encoded.

LOCATING A TITLE

DVD discs are normally divided into titles, which are then sub-divided into chapters. A specific title can be easily found with this unit. Specific titles can be found using either the title menu function, if the DVD disc contains a title menu, or through its unique title number.

Title Menu Function

1.Press the TITLE key. The title menu will appear on the TV screen.

2.Press the appropriate scroll key to select

the desired title. A title may also be located by pressing its assigned number with the number buttons.

Outdoor AM antenna

Coaxial cable(75 ohm)

Coaxial cable (75 ohm)

Outdoor FM antenna

Note: The disc being played must be multi- subtitle encoded.

Camera Angle

The ability to change the camera angle allows

viewer to play director and watch a movie from

different perspectives.

1. Press the ANGLE key on the remote control.

With each press, the camera angle changes. 2. The key may be pressed only when the

flashing angle icon appears in the unit's display panel.

ANGLE

1/4

Note: Camera angle may be changed only in discs with multi-angle capability encoded into them.

3.Press the ENTER key . This will start playback from chapter 1 of the selected title.

Note:

Some discs do not respond to this function. If different instructions appear on the TV screen, follow those instructions. The Instructions given here describe the basic procedure. Procedures may vary depending on the content of the DVD disc. When playing a VCD2.0 disc, TITLE key can be used to return to menu.

Pro Logic selector

When player DVD / VCD disc, first press STOP key, than press Pro Logic key to select Pro Logic ON or OFF channel output.

When player CD and at tuner state, press Pro Logic key to select stereo or 5.1 channel output.

HOW IT WORKS 12

17 HOW IT WORKS