FRONT AND BACK PANELS
Front Panel Functions
1 | 2 | 3 | 4 | 5 | 6 | 7 |
|
|
|
|
|
| VOLUME |
|
|
|
|
|
| |
| TDVD6048 DVD HOME THEATER |
|
|
| DOWN | UP |
|
|
|
|
|
|
SYSTEM SETUP
MP3 Setting
Follow these steps to set the outgoing digital audio format of MP3 tracks (Note: The analog format is fixed to 2 channel ):
A.From Audio mode, press SETUP.
B.Select Audio mode, press ENTER.
C.Select MP3 and press ENTER.
D. Set Digital out to:
PCM (default) to output 2 channel digital from the optical/coaxial
digital audio outputs; e.g.,to a Minidisc recorder.5.1 channel 2 channel
Off to disable MP3 digital output.
Off
E.Press SETUP to save and exit.
1. POWER
Before plugging the power cord into the AC outlet, check to make sure all of the connections have been properly completed. When they have been, carefully plug power cord into outlet.
Press the POWER button on the front panel to power the unit.
When the unit is initially powered, a brief surge of electricity may cause interference with other electronic equipment on the same circuit. If this occurs, connect the unit to an outlet on a different circuit.
2. 
OPEN/CLOSE/PRE/TUN
Use this button to open and close the disc tray while in DVD mode.
While in the tuner mode, this button is used to
select preseting or tuning mode.
3. 
PLAY /AUTO/PAUSE
Use this button to begin play function while in DVD mode.
When in the tuner mode, you may press this button for automatic search.
Use this button to pause play function while in
DVD mode.
4. 
PREV/DOWN
While in the DVD status, you may press this
button for previous track.
While in the tuner mode, you may press this bu-
tton for radio down search.
5.
NEXT/UP
While in the DVD status, you may press this
button for next track.
While in the tuner mode, you may press this
button for radio up search.
6. INPUT SIGNAL SOURCE
Use this button to select the proper input signal source.(Note:The selected input will correspond to the selected input terminal on the rear panel.) 7. VOLUME
Use this button to control the unit's volume.It controls all six channels simultaneously.
Others Setting
Follow these steps to set the outgoing analog and digital audio format of others tracks:
A.From Stop mode, press SETUP.
B.Select Audio and press ENTER.
C.Select Dolby D and press ENTER.
D.Set Analog out to:
2 Channel (default) to output 2 channel stereo audio from the stereo audio output; e.g.,to a VCR or TV.
E.Set Digital out (from Optical out) to:
PCM (default) to output 2 channel digital audio from the optical/coaxial digital audio outputs; e.g.,to a Minidisc recorder. Raw to output the raw 2 channel digital bitstream form th optical/coaxial digital audio outputs; e.g., to an external amplifier.
Off to disable CD others audio output.
F.Press SETUP to save and exit.
More Audio Setup
The More Audio menu includes Prologic and Subwoofer settings.
Prologic Setting
The DVD player has a
Back Panel Functions
A. From Stop mode, press SETUP.
B. Select More Audio and press ENTER. C. Select Prologic and press ENTER.
1. ANTENNA
Use to connect the provided indoor FM and AM loop antennas.
2. AUX IN
Use to connect input for both auxiliary music sources.
3. AUDIO OUT
Use to connect both the right and left channel line outputs as well as subwoofer output.
4.VIDEO OUTPUT
5.
6.REAR
Use to connect the four terminals of the left and right surround sound speakers.
7. FRONT/MAIN
Use to connect the four terminals of the left and right front or main speakers.
8. CENTER
Use to connect the four terminals of the center speakers.
9. SUBWOOFER
Use to connect the four terminals of the subw- oofer speakers.
10. COAXIAL DIGITAL AUDIO OUTPUT 11.120V~60Hz
This unit comes with an AC power cord. Be sure its prongs are dry before plugging it into an electrical outlet. Take caution not to overextend the cord or walk on it.
12. COMPONENT VIDEO OUTPUT
D. Select the desired Prologic setting and press
ENTER:
Auto stereo audio soundtracks will be output in
Dolby Prologic mode.
On all audio soundtracks will be output in Dolby
Prologic mode.
Off (default ) Dolby Prologic decoding will always be inactive.
E. Press SETUP to save and exit.
Subwoofer Setting
You must indicate in the menu system whether or not your audio setup includes a Subwoofer (the 1in 5.1 sourround sound).
A.From Stop mode, press SETUP.
B.Select More Audio and press ENTER.
C. Select Subwoofer and press ENTER.
11 |
|
|
|
|
|
|
|
|
|
|
| 1 |
|
|
|
|
|
|
|
|
|
|
|
| |
SR | SL | FR | FL | CEN | SW |
| AUX IN | LINE OUT |
| OUTPUT |
|
|
|
|
|
|
|
|
| L | L | Pb | Y | VIDEO |
|
120V~60Hz |
|
|
|
|
| COAXIAL |
|
|
|
|
|
|
| SPEAKERS IMPEDANCE 6 |
|
|
| R | R | SW | Pr |
| |||
|
|
|
|
|
|
|
| |||||
6 |
|
| 7 | 8 | 9 | 10 | 2 | 3 |
| 12 | 5 | 4 |
D.Select the desired Subwoofer setting and press
ENTER.
On (default) indicates that you are using a Subwoofer for LFE (low frequency effects) signals.
E. Press SETUP to save and exit.
HOW IT WORKS 6 | 23 HOW IT WORKS |