Problem | Solution |
|
The SENSEO | You have not flushed the machine | |
coffee machine\ | properly before first use. As a result, | |
brews only a | the boiler is not or not completely | |
small quantity | filled. Flush the machine properly | |
of coffee or | (see chapter ‘Preparing the machine | |
no coffee at all | for use’) before you brew another | |
when it is used | cup of coffee. | |
for the first |
|
|
time. |
|
|
The lid cannot | Perhaps a used coffee pod is sticking | |
be closed | to the water distribution disc. If this | |
properly. | is the case, remove the used pod. | |
The machine | Contact the Philips Customer Care | |
has been stored | Centre in your country. | |
in a room that |
|
|
was not frost- |
|
|
free. |
|
|
The SENSEO | Make sure that: | |
coffee is not \ |
|
|
strong enough. |
|
|
| you have used the correct number | |
| of pods and have pressed the right | |
| button. Use 1 pod in combination | |
| with the | |
| the | |
| in combination with the | |
| holder °° and the | |
| °°; |
|
| you have placed the coffee | |
| pod(s) properly in the centre of | |
| the pod holder, to prevent water | |
| from escaping along the edge of the | |
| pod(s). When you use two coffee | |
| pods on top of each other, make | |
| sure that the convex sides of both | |
| pods point downwards and press | |
| the pods lightly into the pod holder; | |
| you have not used the same pod | |
| twice by accident; | |
| the coffee in the pod is evenly | |
| distributed; | |
| If you prefer a more robust flavour, | |
| SENSEO | coffee pods with a |
| stronger | \blend are available. |
The SENSEO | If you prefer a milder flavour, | |
coffee is too \ | SENSEO | coffee pods with a milder |
strong. | blend are\available. | |
The coffee is | Do not use cups that are too large, | |
not hot enough. | as they cause the coffee to get cold | |
| more quickly. When you use cups, | |
| make sure they have a capacity of | |
150ml. When you use a mug, make sure it has a capacity of 280ml.
4222.001.9719.8 | 4/4 |