Philips HD7850 There is some milk left, Milk container, Coffee variety you wanted to brew, Pod

	English 27
Problem	Solution
There is some milk left	1. It is normal that there is some milk left in the milk container after you have
in the milk container	brewed a coffee variety with milk.This extra milk is required to ensure high-
after brewing a coffee	quality frothed milk.
variety with milk.
	2. Perhaps you filled the milk container beyond the level required for the
	coffee variety you wanted to brew.
	3. You may have used milk that is not cold enough. If the milk temperature
	is above the 8°C, the machine uses less milk. Make sure you use cold milk
	straight from the refrigerator (5-8°C).
The coffee varieties	1. It is normal that a coffee variety with milk is less hot than a cup of normal
with milk are not hot	black coffee, as the milk is heated to a lower temperature to ensure high-
enough.	quality frothed milk.
	2.You can preheat the cups with hot water to keep the coffee hot longer.The
	best way to do this is by pressing the 1-cup button qwithout using a coffee
	pod.
	3.You may have used cups that are too large, which cause the coffee to get
	cold more quickly. We advise you to use a 180ml cup for cappuccino, a 260ml
	cup for latte macchiato and a 220ml cup for caffè latte.
The SENSEO® machine	You may have used milk that is too warm. Make sure you use cold milk
splatters when it brews	straight from the refrigerator (5-8°C).
a coffee variety with
milk.
The CALC CLEAN	The CALC CLEAN indicator goes on when you need to descale the
indicator lights up	machine.This happens after 1000 cups of SENSEO® black coffee or 250 cups
continuously.	of cappuccino, latte macchiato or caffè latte have been brewed.To descale
	your SENSEO® machine, follow the instructions in chapter ‘Descaling’.The
	CALC CLEAN indicator goes out after the descaling procedure has been
	performed correctly and the Calc-Clean tool has been removed.

I pressed the CLEAN/ CALC CLEAN button, but the machine does not work.

The descaling cycle lasted only 5 minutes.

1.If you want to flush the milk container unit, make sure you have filled the milk container with cold water and you have inserted the milk container unit properly into the machine.

2.If you want to descale the machine, make sure the Calc-Clean tool is placed correctly. See chapter ‘Descaling’ for more details.

3. Perhaps the machine is still heating up (the light ring around the on/off button flashes slowly).The machine needs some time to heat up before descaling is possible.

The descaling cycle was probably interrupted.This can have several causes: 1) You pressed the on/off button during the descaling cycle 2) You removed the water reservoir during the descaling cycle 3) You did not place the Calc-Clean tool correctly or removed it from the machine during the descaling cycle.