KitchenAid 4171206 installation instructions Undercounter Dishwasher, Before you start

Page 1

Undercounter Dishwasher

IMPORTANT:

Installer: Leave Installation Instructions with the homeowner. Homeowner: Keep Installation Instructions for future reference. Save Installation Instructions for local electrical inspector’s use.

Part No. 4171206

Before you start...

Proper installation is your responsibility. Make sure you have everything necessary for correct installation. It is the personal responsibility and obligation of the customer to contact a qualified installer to assure that electrical and plumbing installation meet national and local codes and ordinances.

Check location where dishwasher will be installed. The location should provide :

l Easy access to water, electricity and drainage.

l Convenient loading - the best position is left or right of kitchen sink.

l Opening that is square for proper dishwasher operation and appearance.

l Cabinet front that is perpendicular to floor.

. Protection against freezing to prevent the water inlet valve, water lines to dishwasher, water lines in dishwasher, and drain from rupturing. (Ruptures from freezing are not covered by the warranty.)

l l/4” minimum clearance between motor and flooring to prevent motor overheating.

Image 1
Contents Before you start Undercounter DishwasherObserve All Governing codes Ordinances Parts supplied for installationFlgure Drain requirements Water requirementsFlexible cord connection Alternate methods Install air gap according to kit instructionsNow start Occur. Remove paper from bottom of dishwasher Open dishwasher124Start dishwasher Replace terminal box cover 122Check that all parts haveNo water leaks Guide to fully understand your new dishwasherIf the dishwasher is not operating properly Custom-made panelsPrepared by KitchenAid@,St. Joseph, Michigan