KitchenAid 3187360 installation instructions Now Start, Electrical connection, Panel B

Page 3

Dl This appliance should be connected H directly to the fused disconnect (or

circuit breaker box) through flexible, armored or non-metallic sheathed, copper cable (with grounding wire). The flexible armored cable from the appliance should be connected directly to the junction box.

El Locate the junction box to allow as

B. Where local codes Do Not

Now

start...

permit...

With

oven

in kitchen.

connecting the cabinet-grounding conductor

 

 

 

to the neutral (white) junction box wire:

 

Remove shipping materials, tape, and

 

 

Cable from

 

protective film from oven. Do Not

 

remove shipping base at this time.

 

121

Remove the racks and other parts

 

 

. from inside both ovens.

. much slack in the cable as Dossible between the junction box and the appliance so that the oven can be moved if servicing is ever necessary. Do Not cut the conduit.

El A U.L.-listed conduit connector must H be provided at the junction box.

A wiring diagram is included in the Tech Sheet. The Tech Sheet is located

behind the control panel.

Electrical connection

Electrical Shock Hazard

l Electrical ground is required on this appliance.

l Do Not connect to the electrical supply until appliance is permanently grounded.

l Disconnect power to the junction box before making the electrical connection.

l This appliance must be connected to a grounded, metallic, permanent wiring system, or a grounding connector should be connected to the grounding terminal or wire lead on the appliance.

Failure to do so could result in a fire, personal injury or electrical shock.

This appliance is manufactured with white (neutral) power supply wire and a cabinet- connected green grounding wire twisted together.

Connect the appliance cable to the junction box through the U.L.-listed conduit connector. Complete electrical connection according to local codes and ordinances.

A. Where local codes permit...

connecting the cabinet-grounding conductor to the neutral (white) junction box wire:

Cable from

Junction power supply box \

from oven connector

Figure 2

Ungrounded Neutral

1.Disconnect power supply.

2.Separate the green and white appliance cable wires.

3.Connect the white appliance cable wire to the neutral (white) wire in the junction box.

4.Connect the two black wires together; then the two red wires together. See Figure 2.

5.Connect the green or bare grounding wire from the appliance cable to a grounded wire in the junction box.

C. If connecting to a four-

wire electrical system...

Do Not connect the cabinet-grounding conductor to the neutral (white) junction box wire.

Cable from

Figure 3

conduit

connector

1.Disconnect the power supply.

2.Separate the green (or bare) and white appliance cable wires.

3.Connect the white appliance cable wire to the neutral (white) wire in the junction box.

4.Connect the two black wires together; then the two red wires together. See Figure 3.

5.Connect the green appliance cable wire to the green grounding wire in the junction box.

Personal Injury/Product Damage Hazard l Use both hands to remove oven doors. l Grasp only the sides of oven doors.

l Do Not use handle or any portion of the trim for lifting.

l Because of the weight and size of the oven, two or more people are needed to move and safely install the oven.

Failure to properly grasp the oven doors or to lift ovens properly could result in

1damage to the product or personal injury.

131Completely open the lower oven door.

n Remove the two oven door screws. (Not all models have oven door screws.)

screw

141n

Close lower oven door to the broil position. Grasp the sides of the oven door and pull the door up and out of the hinge slots to remove Set door aside.

151Repeat Steps 3 and 4 for upper oven n door.

Bare

or/

 

 

green

wire

 

 

 

 

I

conduit

Figure

1

Cable

connector

from ov en

 

 

 

 

Grounded Neutral

1.Disconnect the power supply.

2.Remove the terminal block cover.

3.Connect together 3 wires: green and white appliance cable wires and the neutral (white) wire in junction box.

4.Connect the two black wires together; then the two red wires together. See Figure 1.

Product Damage

Before moving oven across floor, check that oven is on shipping base or slide oven onto cardboard or hardboard.

Failure to follow these instructions may result in damage to floor covering.

161Turn power supply off. Move oven close n to final position. Remove and discard

shipping base. Feed appliance cable through the opening in cabinet. Make electrical connection. See “Electrical requirements” and “Electrical connection” sections, Panels A and B.

Panel B

Image 3
Contents Installation Instructions Panel a Fuse RequirementsNow Start Electrical connectionPanel B Check the operation of the Broil Elements Dual thermal convection double oven control panelNumbers correspol Id to steps Panel C 1121Check the operation of the Bake W elementAssistance If you need ServiceDoes If you Not

3187360 specifications

The KitchenAid 3187360 is a versatile and innovative kitchen appliance designed to simplify various cooking tasks and enhance culinary experiences. This model is part of KitchenAid's esteemed lineup, known for its durability, performance, and stylish design that complements any kitchen decor.

One of the standout features of the KitchenAid 3187360 is its robust 325-watt motor. This powerful motor provides the strength needed to tackle even the toughest mixing tasks with ease. Whether you're kneading dough for homemade bread or whipping egg whites for meringue, the motor ensures consistent results every time.

In addition to its power, the KitchenAid 3187360 boasts a unique 10-speed control system, allowing users to tailor their mixing and kneading speeds according to their specific needs. This level of customization enables precise control, making it possible to achieve the perfect mixture for a variety of recipes. The appliance also comes equipped with a tilt-head design, which grants easy access to the mixing bowl and attachments, making it convenient for adding ingredients and changing accessories during the mixing process.

The KitchenAid 3187360 includes a 4.5-quart stainless steel mixing bowl, which is not only durable but also dishwasher safe for easy cleaning. This bowl size is ideal for most household cooking and baking tasks, providing enough capacity to prepare meals for families or small gatherings.

One of the notable features of the KitchenAid 3187360 is its compatibility with a wide range of attachments, allowing users to transform the stand mixer into a multifunctional kitchen tool. From pasta makers and food grinders to vegetable slicers and ice cream makers, the available attachments enable culinary enthusiasts to explore new recipes and cooking techniques without cluttering their kitchen counters with multiple machines.

In terms of design, the KitchenAid 3187360 is available in various colors, catering to different tastes and kitchen aesthetics. Its classic, sleek design not only makes it a functional appliance but also a stylish addition to any countertop.

Overall, the KitchenAid 3187360 combines powerful performance, remarkable versatility, and timeless design, making it an essential tool for any home cook seeking to elevate their culinary creations. Its array of features and ability to adapt to various cooking tasks make it a standout choice in the world of kitchen appliances.