KitchenAid Convection Oven installation instructions Power supply cord method

Page 6

Power supply cord method:

NOTE: The bag containing three aluminum terminal lugs is not used when connecting the range using a power supply cord.

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Use a new 40 amp power supply cord.

Plug into a grounded outlet.

Failure to follow these instructions can result in death, fire, or electrical shock.

WARNING - Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman

easily attach the wiring to the terminal block.

5.Use only ring-type terminals to connect the power supply.

6.Complete electrical connection according to your type electrical supply (“Four-wire electrical connection” or “Three-wire electrical connection.”)

Four-wire electrical connection:

ground

link

ground-link screw

Figure1

10.Connect the neutral wire (center wire) to the center terminal screw on the terminal block. See Figure 2.

11.Connect the other two wires (lines 1 and 2) to the outer screws on the terminal block. See Figure 2.

12.Securely tighten nuts with 3/8" nut driver for proper electrical connection.

13.Tighten the strain relief screws.

14.Replace the terminal block cover.

15.Plug power supply cord into grounded electrical outlet.

Three-wire electrical connection:

center terminal block screw

if you are in doubt as to whether the appliance is properly grounded. Do not modify the power supply cord plug. If it will not fit the outlet, have a proper outlet installed by a qualified electrician.

This range is manufactured with the neutral terminal connected to the cabinet.

neutral wire (center wire)

center terminal block screw

ground link

ground-link screw

ground link

line 1

neutral (center wire)

line 2

U.L.-listed strain relief and 40 amp range power supply cord

Use a three-wire, U.L.-listed, 40 amp power supply cord (pigtail); or if local codes Do Not permit ground through the neutral, use a four-wire power supply cord rated at 250 volts, 40 amps and investigated for use with ranges. (See “Four-wire electrical connection.”)

line 1

green ground wire

line 2

U.L. listed strain relief and 40 amp range power supply cord

Figure 2

Figure 3

Use this method only if local codes permit connecting cabinet-ground conductor to neutral wire of power supply cord.

opening for conduit connector

remove knockout for 40 amp power cord and U.L. listed strain relief

1.Disconnect power.

2.Remove the knockout for the 40 amp power supply cord.

3.Assemble a U.L.-listed strain relief in the opening.

4.Insert the power supply cord through the strain relief, allowing enough slack to

Use this method for new installations, mobile homes, recreational vehicles and whenever four-wire installation is required.

7.Remove the ground-link screw from the range frame. Save the ground-link screw. Bend up the ground link so that it does not contact the range. See Figure 1.

8.Connect the green ground wire from power supply cord to the range using the ground-link screw. The ground wire must be attached first and must not contact any other terminal. See Figure 2.

9.Use 3/8” nut driver and remove the outside nuts on the terminal block screws. Do not loosen the factory- tightened nuts behind the outside nuts.

7.Use 3/8” nut driver and remove the outside nuts on the terminal block screws. Do not loosen the factory- tightened nuts behind the outside nuts.

8.Connect the neutral wire (center wire) to the center terminal screw on the terminal block. See Figure 3.

9.Connect the other two wires (lines 1 and 2) to outer terminal screws on the terminal block. See Figure 3.

10.Securely tighten nuts with 3/8" nut driver for proper electrical connection.

11.Tighten the strain relief screws.

12.Replace the terminal block cover.

13.Plug power supply cord into grounded electrical outlet.

6

Image 6
Contents Table of Contents If you need assistanceMobile home installation Tools neededParts supplied Product dimensions Cabinet dimensions/requirementsSlide-in Range Slide-in ranges countertop preparation If connecting to a four-wire systemIf connecting to a three-wire system Electrical requirementsNow start Electrical connectionPower supply cord method Direct wire method Copper or Aluminum wire Operating position Check operation 888 FIf range does not operate Page Home Appliances
Related manuals
Manual 3 pages 17.59 Kb

Convection Oven specifications

The KitchenAid convection ovens, specifically the KEBC147K, KEBC288, and KEBC247K models, are designed to elevate your culinary experience with an impressive range of features, innovative technologies, and superior characteristics that cater to both amateur cooks and professional chefs alike.

One of the standout features of the KitchenAid convection ovens is their advanced convection cooking technology. This system employs a fan and exhaust system that circulates hot air around the oven, allowing for even cooking and baking. As a result, food retains moisture while still achieving a desirable crispy texture, making these ovens perfect for roasting meats, baking desserts, and even dehydrating fruits and vegetables. The even heating ensures that dishes come out perfectly cooked every time, eliminating the common problem of hotspots in traditional ovens.

The KEBC147K, KEBC288, and KEBC247K models are equipped with a sleek and modern design, complete with an easy-to-read LCD display that allows users to navigate through various settings effortlessly. The touch control panel makes it simple to select cooking modes, set timers, and adjust temperatures, providing an intuitive user experience. Additionally, the large capacity allows for cooking multiple dishes simultaneously, ideal for family meals or entertaining guests.

These models also feature advanced self-cleaning options, making maintenance a breeze. The EasyCruise technology epitomizes convenience with its high-temperature cleaning cycle that eliminates grease and grime without the need for harsh chemical cleaners.

Moreover, the KitchenAid convection ovens come with several preset cooking options that allow users to achieve perfect results with minimal effort. From baking bread to broiling fish, the ovens adjust temperature and time automatically, providing versatility and ease of use.

Another noteworthy characteristic is the ability to save favorite recipes using the custom cooking option. This allows users to program specific temperatures and cooking durations for frequently prepared dishes, streamlining the cooking process.

Lastly, KitchenAid ensures safety with features such as the oven lock and automatic shut-off, providing peace of mind while cooking. In summary, the KitchenAid convection ovens - KEBC147K, KEBC288, and KEBC247K models - blend functionality and style, making them an excellent addition to any kitchen. Quality construction combined with innovative technology is what sets KitchenAid apart, making these ovens a valuable investment for those who value culinary excellence.