KitchenAid KFP1344 Using the 3-in-1 Feed Tube, Installing the Optional Chef’s Bowl not included

Setting Up Your Food Processor

Installing the Optional Chef’s Bowl (not included)

The optional Chef’s Bowl can only be used with the slicing or shredding discs. It cannot be used with the multipurpose blade.

1.Place the Chef’s Bowl inside the work bowl, sliding it down over the power shaft. Rotate the Chef’s Bowl until it drops into place. Once in place, it cannot be rotated.

2.Install the desired slicing or shredding disc.

3.Install the work bowl cover, being sure it locks into place.

To remove the Chef’s Bowl after processing, grasp by the finger grips along the top edge of the bowl and lift straight up and out.

Using the 3-in-1 Feed Tube

The 3-in-1 feed

tube features a 3-piece food

pusher. Use the

entire food pusher to process large

items, or use the inner portions to

create medium- sized or small feed tubes to process smaller items.

To slice or shred small items, insert

the 3-piece food pusher into the feed tube, then lift out the small pusher to remove. Use the small feed tube and

pusher to process small or slender items, like single carrots or celery stalks. When not using the small feed tube, be sure to lock the small pusher into place.

To slowly drizzle oil or other liquid ingredients into the work bowl, just fill the small pusher with the desired amount of liquid. A small hole in the bottom of the pusher will drizzle the liquid ingredient at a constant rate.

English

Finger grips

15