Venting requirements

Ductwork needed for installation is not supplied.

Wall cap is provided with interior mounted motor.

Flexible metal ductwork is Not recommended. If it is used, calculate each foot of flexible metal ductwork as two feet of straight metal ductwork. Flexible metal elbows count twice as much as standard elbows. Use metal ductwork only.

Figures 3-7 show common venting methods and types of materials needed. If the ductwork cutout location falls over a joist or stud, a supporting frame must be constructed. Do not cut joist or stud.

NOTE: Make sure there is proper clearance within the wall or floor for exhaust duct before making cutouts.

Recommended duct length for interior mounted blower

Use 6” duct with maximum length of 25 feet for duct system. For best petformance, use no more than three 90” elbows. To calculate the length of system you need, add the equivalent feet for each duct piece used in the system. See the following example:

6” duct system

I	Fire Hazard

Venting system MUST terminate to the outside.

Do Not terminate the ductwork in an attic or other enclosed space.

Do Not use 4-inch laundry-type wall caps. Do Not use plastic-type ductwork.

Use only metal ductwork.

Failure to follow these instructions can result in a fire.

To reduce risk of fire and to properly exhaust air, be sure to duct air outside.

Do Not vent exhaust air into spaces within walls or ceilings or into attics, crawl spaces or garages.

Determine which venting method to use. Ductwork can extend either through the wall or roof.

The length of the ductwork and number of elbows should be kept to a minimum to provide efficient performance. The size of the ductwork should be uniform. Do Not install two elbows together. Use duct tape to seal all joints in the duct system.

Use caulking to seal exterior wall or floor opening around cap.

Interior mounted vent motor installation methods

To install ductwork under a concrete slab, see Insert Sheet.

Island location

Figure 3

Interior wall location

Figure 4

90” elbows	--+I_
1,6fi-	--+I_
	II
	wall cap

I	Maximum length = 25 ft
I
2 - 90 elbows		= loft.
1 - wall	cap	=	Oft.
8 feet straight		=	8ft.
Length	of 6” system	= 18 ft.
Recommended	standard	fittings

3-l	/4” x 10” to 6”	6” to 3-l /4” x lo”
90”	elbow = 5 ft.	90” elbow = 9 ft.

PO0elbow =	6”	to	3-l	/4”	45” elbow	6” wall	cap	min.
i ft.	x	lo”	=	1 ft.	= 2.5 ft.	28 in.2	open	= 0 ft.

3182048 specifications

The KitchenAid 3182048 is an essential component renowned for its durability and versatility, an integral part for any home chef equipped with KitchenAid appliances. A genuine part that ensures seamless compatibility with various KitchenAid stand mixers, this model represents the brand's commitment to quality and performance.

One of the main features of the KitchenAid 3182048 is its robust build quality. Made from high-grade materials, it guarantees longevity, resisting wear and tear even with regular, heavy use. This is critical for home cooks who rely on their kitchen tools day in and day out, assuring them that a replacement part won’t falter under pressure.

The KitchenAid 3182048 showcases an innovative design that enhances functionality. It is engineered to work effectively with various attachments, making it a versatile choice for preparing a wide range of dishes. Whether whipping cream, mixing dough, or blending ingredients, this component is designed to facilitate a smooth and efficient process.

This part also benefits from KitchenAid's renowned technological advancements. For instance, the compatibility with the brand's multi-purpose attachments allows users to transform their stand mixer into an even more valuable kitchen tool. Attachments like food grinders, pasta makers, and spiralizers can easily connect, expanding the culinary possibilities.

Furthermore, the KitchenAid 3182048 is easy to install and remove, making it user-friendly for both novice and experienced cooks alike. This simplicity encourages more experimentation in the kitchen, as users can quickly shift between tasks without hassle.

Another key characteristic of the KitchenAid 3182048 is its ease of maintenance. It is designed for quick cleaning, either by hand or in the dishwasher, ensuring that it remains hygienic and ready for use in minimal time. This focus on hygiene is particularly important for today's health-conscious consumers.

In conclusion, the KitchenAid 3182048 stands out as a robust and versatile component tailored for KitchenAid stand mixers. With its durable construction, innovative design, compatibility with numerous attachments, and ease of maintenance, it is an exemplary choice for anyone looking to enhance their kitchen experience. Whether you're a home chef or just someone who enjoys cooking occasionally, this part ensures that your KitchenAid mixer remains a dependable ally in culinary adventures.