Setting Up Your Food Processor
Installing the Adjustable Slicing Disc
IMPORTANT: The adjustable slicing disc can only be installed in one direction.
1.With the work bowl installed, place the drive adapter on the power shaft of the base.
2.Holding the adjustable slicing disc by the 2 finger grips, align the pins onto the adjustable slicing disc adapter into the
3.Lower the slicing blade and slicing adapter onto the drive adapter.
TIP: You may need to turn the disc/drive adapter until it drops down into place.
4. Install the work bowl cover, being sure it |
|
locks into place. | English |
|
Adjusting the Slicing
Thickness
Set the desired slicing thickness by moving the lever to the left for thinner slices or to the right for thicker slices.
Thinner
Thicker
NOTE: The lever only works with the adjustable slicing disc. Changing thickness settings with other discs or blades installed will have no effect on operation.
13