Installation
Positioning and connection
Unpacking
1Unpack the device immediately and make sure it has not been damaged during transport. Should it be damaged, do not connect, and get in touch with the Dealer.
2Carefully remove the protections and the adhesives, open the door and make sure all the components are present.
3Take out the power supply cable.
Positioning
1Position the device in a well ventilated area, not damp and free (avoid cabinets with closed walls).
2Keep the device away from heat sources.
3Make sure the minimum distances between the device and the walls of the room where it is placed are kept, in order to ensure perfect ventilation of the device.
See figure.
Ventilation space: at least 50 mm
Wiring connection |
|
After transport, stand the device vertically, and wait for | GB |
at least 3 hours before connecting it to the wiring |
|
| |
system. Before putting the plug into the power socket, |
|
make sure that: |
|
•the socket is earthed and according to legal regulations;
•the socket is able to hold up to the maximum power load of the machine, indicated on the Data Sheet table or on the feature plate to the bottom right (see Description of the device);
•the power supply voltage falls within the range indicated on the Data Sheet table or on the feature plate to the bottom right (see Description of the device);
•the power socket is compatible with the plug of the device. Otherwise, replace the socket or the plug; do not use extensions or multiple sockets.
Dimensions of the compartment
Dimensions of the cellar
Furniture side area
3