FRIDGE FREEZER - MODELS RFA18, RFM18, RFA66, RFM66
INSTRUCTIONS FOR INSTALLATION & USE
GETTING STARTED: To ensure that your fridge freezer runs reliably and efficiently follow these steps.
STEP 1 | STEP 2 |
Choose a location for your | Move the fridge freezer |
fridge freezer, away from | into position, using the |
any heat sources and | sides of the cabinet. |
allow adequate | Take care to avoid |
ventilation - 100mm | damaging the refrigerant |
(4 inch) gap above. | circuit pipe work on the |
| rear. |
INSTALLATION | SAFETY & |
|
|
STEP 3
Level the fridge freezer by adjusting the front feet. This will stop rocking or vibration and keep the door aligned.
NB. The spanner is for illustration only and is not supplied with the fridge freezer.
STEP 5
Plug in and switch on. Allow the fridge freezer to cool before placing food inside.
The high temperature light will stay on until the fridge freezer has cooled down.
All food in the fridge freezer should be covered.
STEP 4
Before plugging in and switching on, leave the fridge freezer in its final location for at least 15 minutes to allow it to settle.
STEP 6
If you are freezing fresh food, turn on fast freeze by pressing the switch 24 hours before placing the food inside.
Place the fresh food inside.
Remember to turn fast freeze off after 24 hours, however if you forget to do so it will automatically cancel after 48 hours.
CONTROLS |
|
|
|
USEFUL ADVICE |
|
|
|
|
|
MAINTENANCE | CLEANING & |
|
|
TROUBLESHOOTING |
|
STEP 7
Your fridge freezer is now working.
If after 24 hours your fridge freezer is not operating as you want, refer to the
TROUBLESHOOTING section.
Read the rest of these instructions to get the best from your appliance and
remember to fill in your guarantee registration.
Keep this Book in a safe place for quick reference.
GUARANTEE | SERVICE & |
|
|