Industry Automation and Drive Technologies - SCE
EXERCISES
We are going to apply to the exercises what we learned in the theory part and the step by step instructions. We are going to utilize and expand on the existing
This exercise is intended as a complex exercise, where the technical knowledge presented in the entire Module P01 is repeated. The tasks below are to be an aid to incorporate with Reactor R002 the second line that was missing so far into the project.
TASKS
The following steps are based on the step by step instructions. For each task, the corresponding steps in the instructions can be used as an aid.
1.For the second line, the corresponding plant hierarchy has to be implemented. Set up a folder for each of the individual drive functions listed in Table 1.
2.Implement the individual drive functions in the associated folder of the plant hierarchy. Use the functions that are already implemented from the previous exercises. When you implement the individual drive functions, don’t omit to carry out the required steps for plant safety.
3.Based on the step by step instructions, implement in the SFC step sequence a second line that includes the required steps for Reactor R002. The objective is implementing the recipe according to the process description. In the step by step instructions, all steps in reference to Reactor R001 are already implemented.
| Table 1: Required individual drive functions | |
|
|
|
Name |
| Type |
A1T1S001 |
| Motor |
A1T1S002 |
| Motor |
A1T1X004 |
| Valve |
A1T1X005 |
| Valve |
A1T2H004 |
| Manual operation |
A1T2H005 |
| Manual operation |
A1T2H009 |
| Manual operation |
A1T2H016 |
| Manual operation |
A1T2L002 |
| Measure level |
A1T2S002 |
| Motor |
A1T2S004 |
| Motor |
A1T2X004 |
| Valve |
A1T2X005 |
| Valve |
A1T2X008 |
| Valve |
TIA Training Manual | Page 41 of 41 | Module P01_07 |
Status: 12/2010 |
| PCS 7 for Universities |