Siemens 125-5033 owner manual Low Speed Electronic Actuation, Pneumatic Actuation

Page 16

Fume Hood Controller Owner's Manual

Low Speed Electronic Actuation

Alternately, when speed of response is not an issue, slower speed electronic actuation may be used. This can be used when the change-of-state between High and Low can take place in 15 seconds or more.

Low Speed Actuator (GMA13x).

Pneumatic Actuation

The pneumatic actuator is connected to an exhaust flow control device in the fume hood exhaust duct. The standard pneumatic actuator (Figure 8) used with the Fume Hood Controller is the No. 3 unit. The No. 3 actuator is used because of its small size and quick response time. The actuator has a deep drawn aluminum housing, a rubber diaphragm, and a spring return rated at 8 to 13 psi. Pneumatic actuation requires two components, the actuator and the transducer (AO-P module).

WARNING:

Due to the design, parameters and the response times required by the Fume Hood Controller, the No. 3 actuator always must be replaced with the same part or a Siemens Building Technologies, Inc. approved equivalent. Any modifications that are not approved may affect the safety and performance of the Fume Hood Controller.

8

Siemens Building Technologies, Inc.

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Two-State Constant Volume Fume Hood Controller 125-5033 Rev. AA, SeptemberPage Service Statement Page Table of Contents High and Low Exhaust Flow Control How To Use This Manual Manual OrganizationManual Conventions Convention ExampleManual Symbols Where To Send CommentsNotation Symbol Meaning Datamate SoftwareProduct Overview Related EquipmentElectronic Actuation Pneumatic ActuationOrdering Notes Application DescriptionPower Wiring Communication WiringHardware Inputs Hardware OutputsController LED Indicators Operator Display Panel ODPLED Type IndicationLaboratory Exhaust Air Terminal Operator Display PanelVenturi Air Valves Laboratory Exhaust Air TerminalHigh Speed Electronic Actuation Low Speed Electronic Actuation Pneumatic ActuationAnalog Output-Pneumatic AO-P Module Pneumatic ActuatorAirflow Sensor Differential Pressure TransmitterCables Fume Hood Controller 2-Position Constant Volume ApplicationsHigh and Low Exhaust Flow Control CalibrationControl Loops ElectronicAlarm Operation DO3 Output FunctionalityAlarm Strategies Emergency Purge FeatureEmergency Purge Operation Emergency Purge Strategies Fail-safe Operation Point Database Address Descriptor DescriptionFlow Coeff Flow P Gain Basic Service Information TroubleshootingPreventive Maintenance Safety Features Controller LEDsGlossary AlgorithmCentralized control Control loopOCC mode English unitsEquipment controller Field panelOverride switch Slave modeOn text Portable Operator’s TerminalUnocc mode Terminal Equipment ControllerIndex ApplicationIndex

125-5033 specifications

The Siemens 125-5033 is a highly regarded circuit breaker in the world of electrical engineering and power distribution. Known for its robust design and versatile applications, this device offers a host of features that make it suitable for both commercial and industrial use.

One of the main features of the Siemens 125-5033 is its compact size. This allows for easy integration into existing systems without occupying excessive space, making it an ideal choice for facilities with limited room for electrical infrastructure. Its ability to handle high current ratings, typically around 125 amps, ensures that it can support a variety of electrical loads, making it versatile across different applications.

The Siemens 125-5033 employs advanced technologies, such as thermal-magnetic trip mechanisms. This allows for reliable protection against overloads and short circuits. The thermal component of the trip mechanism is designed to react to sustained overcurrent conditions, while the magnetic component responds instantaneously to short circuits. This dual-functionality ensures that the circuit breaker can effectively protect both the conductors and the connected equipment.

In terms of safety, the Siemens 125-5033 comes with advanced arc suppression technologies that minimize the risk of arcing during the circuit interrupting process. This not only enhances the longevity of the breaker but also safeguards personnel working near electrical installations. Additionally, the device features a clear, accessible reset mechanism, making it user-friendly and easy to operate in case of an interruption.

Another notable characteristic of the Siemens 125-5033 is its built-in ground fault protection option. This capability provides an added layer of safety, ensuring that any ground faults are detected and addressed promptly. It is particularly useful in environments where moisture or dust can compromise electrical safety.

The Siemens 125-5033 also boasts compatibility with various monitoring and control systems, enabling seamless communication and integration into smart building management systems. This feature allows facility managers to monitor power usage, identify potential issues, and optimize energy consumption effectively.

Overall, the Siemens 125-5033 circuit breaker is a reliable, safe, and technically advanced choice for those looking to enhance their electrical systems. Its compact size, dual-trip mechanism, ground fault protection, and compatibility with modern technologies make it a valuable asset for any facility looking to improve its electrical safety and efficiency.
Top Page Image Contents