Additional options
* depending on model
Additional options 9 can be set with the buttons.
Eco Option *
Water and energy consumption can be reduced with the ªEco Optionº function. The running time is extended for optimum washing and drying results.
Half load *
en
Washing the dishes
Programme data
The programme data (consumption values) can be found in the summary of instructions. They refer to normal conditions and the water hardness set
value . Different influencing factors such as water temperature or line pressure may result in deviations.
Aqua sensor *
* depending on model
If you have only a few items to wash (e.g. glasses, cups, plates), you can switch to ªhalf loadº. This will save water, energy and time. It is recommended to put a little less detergent in the detergent dispenser than for a full load.
Hygiene *
The temperature is increased during the rinsing process. This increases the hygiene status. This additional option
is ideal for cleaning e.g. chopping boards and baby bottles.
The Aqua sensor is an optical measuring device (light barrier) which measures the turbidity of the rinsing water.
The Aqua sensor is used according to the programme. If the Aqua sensor is active, ªcleanº rinsing water can be transferred to the next rinse bath and water consumption can be reduced by 3±6 litres. If the turbidity is greater, the water is drained and is replaced with fresh water. In the automatic programmes the temperature and running time can also be adjusted
to the degree of soiling.
Switching on the appliance
IntensiveZone *
Perfect for a mixed load. You can wash very soiled pots and pans in the lower basket together with normally soiled utensils in the upper basket. The spray pressure in the lower basket is intensified, the rinsing temperature is increased slightly.
Extra drying*
An increased temperature during the final rinse and an extended drying phase mean that even plastic parts dry well. There is a slight increase in the energy consumption.
Turn on the tap fully. Open the door.
Switch on ON/OFF switch 1 . The display of the last selected programme flashes. This programme remains selected if no other programme button 2 is pressed.
The expected programme duration flashes on the digital display 3 .
Press the START button 10 .
Close the door.
The programme starts running.
15