Door cannot be closed.
Door lock has been activated. To reset, close the door with greater force.
... changing settings
A setting cannot be changed, a programme starts.
Wrong programme button pressed. Terminate the programme
(see chapter entitled ªTerminating the programme (Reset)º) and start all over again.
You did not wait until programme ended.
Cover on the detergent dispenser cannot be closed.
Detergent dispenser overfilled or mechanism blocked by sticky detergent residue.
Detergent residue in the detergent dispenser.
Dispenser was damp when filled.
“check water supply” 4 display lights up.
Tap turned off.
Water supply interrupted. Supply hose kinked.
Filter in the water supply blocked. Switch off the appliance and pull out the mains plug.
Turn off the tap.
Clean filter in the supply hose.
Reconnect power supply.
Turn on the tap.
Switch on the appliance.
en
Water is left in the appliance at the end of the programme.
(E24) Waste water hose is blocked or kinked.
(E25) Waste water pump blocked, cover on the waste water pump is not locked in position (see Maintenance and Care).
Filters blocked.
The programme has not yet ended. Wait until programme ends (digital display indicates 0:00) or implement the ºResetº function.
Refill indicator for salt 5 and/or
Refill indicator/s switched off. Adequate
Refill indicator for special salt 5 is lit.
No salt.
Refill with salt.
Sensor does not detect salt tablets.
Use different special salt.
... during the wash cycle
Unusual foam formation
Handwash liquid in the rinse aid dispenser.
Spilled
Appliance stops during the wash cycle.
Power supply interrupted.
Water supply interrupted.
Knocking/rattling noise during rinsing
Spray arm is striking utensils.
Utensils not arranged correctly.
21