Disposing of the plug | GB | ||
Cut off and dispose of the supplied plug if it does not fit | |||
| |||
your socket. The cable should be cut as close as |
| ||
| |||
possible to the moulded plug. |
| ||
Remove the fuse. |
|
| |
WARNING: |
|
| |
To avoid a shock hazard do not insert the discarded |
| ||
plug into a socket anywhere else. |
| ||
Fitting a new plug |
|
| |
IMPORTANT: |
|
| |
WIRES IN THE MAINS LEAD ARE COLOURED IN |
| ||
ACCORDANCE WITH THE FOLLOWING CODE... |
| ||
Green and Yellow | - Earth |
| |
Blue | - Neutral |
| |
Brown | - Live |
| |
As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
-Connect Green and Yellow wire to terminal marked
'E' or 
or coloured Green and Yellow.
-Connect Brown wire to terminal marked 'L' or coloured red or brown.
-Connect Blue wire to terminal marked 'N' or coloured Black or Blue.
If a 13amp plug (BS 1363) is used it must be fitted with a 13amp fuse. A 15amp plug must be protected by a 15amp fuse, either in the plug or adaptor or at the distribution board.
If you are in any doubt about the electrical supply to your machine, consult a qualified electrician before use.
CE Marking certifies that this appliance conforms to the following EEC directives :
Low Voltage Equipment - 73/23/EEC & 93/68 EEC Electromagnetic Compatibility 89/336/EEC, 92/31/EEC & 93/68/EEC
3