Hotpoint HDR190I manual Troubleshooting, Malfunctions, Possible causes / Solutions

Page 10

Troubleshooting

GB If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the following list.

Malfunctions:

The internal light does not illuminate.

The refrigerator do not cool well.

The food inside the refrigerator is beginning to freeze.

The motor runs continuously.

The appliance makes a lot of noise.

There is water at the bottom of the refrigerator.

Possible causes / Solutions:

The plug has not been inserted into the electrical socket, or not far enough to make contact, or there is no power in the house.

The doors do not close properly or the seals are damaged.

The doors are opened too frequently.

The TEMPERATURE ADJUSTMENT knob is not in the correct position

The refrigerator have been over-filled.

The TEMPERATURE ADJUSTMENT knob is not in the correct position.

The door is not closed properly or is continuously opened.

The outside ambient temperature is very high.

The thickness of the frost exceeds 2-3 mm (see Maintenance).

The appliance has not been installed on a level surface (see Installation).

The appliance has been installed between cabinets that vibrate and make noise.

The internal refrigerant makes a slight noise even when the compressor is off. This is not a defect, it is normal.

The water discharge hole is blocked (see Maintenance).

10

Image 10
Contents Instructions for Installation and Use Retention of this Instruction Book Operating Instructions FridgeInstallation Positioning and connectionFitting a new plug Description of the appliance Overall view Setting the temperature Accessories Start-up and use Using the refrigerator to its full potential Cleaning the appliance Maintenance and careSwitching the appliance off Replacing the light bulbDisposal Precautions and tipsGeneral safety Respecting and conserving the environmentPossible causes / Solutions TroubleshootingMalfunctions Guarantee After Sales Service