Hotpoint HM311i manual Installation, Before Fitting, Choosing a location

Page 4

Installation.

WARNING: THE APPLIANCE SHOULD ONLY BE INSTALLED BY A QUALIFIED ELECTRICIAN IN COMPLIANCE WITH THESE INSTRUCTIONS, CURRENT STANDARDS AND REGULATIONS.

Before Fitting:

Before connecting to the electricity supply leave the appliance to stand for 2 hours to allow the cooling system to settle.

Please read through this section before starting any work.

At the base of the kitchen unit intended for installing the appliance, there should be at least 200cm2 free space, for adequate air circulation.

Do not cover the air outlet grille at the top of the appliance.

Your Integrated Fridge Freezer is designed to fit into a tall housing as shown (fig 1). It is vitally important that the appliance is vented correctly.

Choosing a location:

Your Integrated Fridge Freezer should be fitted into a kitchen unit space where it is easy to use.

The power socket should be in a readily accessible position adjacent to the unit. Never place the appliance near a heat emitting device (eg. cooker, radiator, water heater or similar) and do not expose it to direct sunlight. In such a position your Fridge Freezer will have to work harder and will cost more to run and may be damaged by the heat. The appliance may be exposed to lower or higher temperatures but only for short periods of time and the temperature should never be lower than 5˚C.

The rear wall of the appliance gets warm during operation and water evaporates from the drain pan on the compressor. You must therefore provide adequate air circulation at the rear of the appliance.

A (mm)

B (mm)

C (mm)

 

 

 

Bottom door

Top door

Cabinet

 

 

 

 

846

 

840

1775-1780

 

 

 

 

Fig. 1

 

 

 

 

 

 

545

Plinth Ventilation

545

4

Image 4
Contents Instructions for Installation and Use Integrated Fridge / Freezer Model HM311iElectrical Supply Important InformationContents Retention of the Instruction BookBefore Fitting InstallationChoosing a location Installation Door reversal Installation Door reversal Mounting the appliance Mounting the appliance Get to know your Appliance Final Check Getting your Appliance ready for useRunning in the Compressor Temperature Selection ControlsStoring Food Storing Fresh FoodFresh Food Storage Time Refrigerator Fresh FoodFood Fast freeze switchStorage Time Caring for your Appliance DefrostingAutomatic Defrosting of the Refrigerator Replacing the Light BulbCleaning the Appliance Going AwayTroubleshooting Do not Open the Freezer DoorAfter Sales Service Repair Service and Information Help DeskGuarantee Recycling & Disposal InformationAfter Sales Service Key Contacts

HM311i specifications

The Hotpoint HM311i is a versatile and efficient built-in microwave oven designed to enhance your culinary experience. Perfect for modern kitchens, it combines functionality with sleek aesthetics, making it a popular choice among homeowners.

One of the standout features of the HM311i is its spacious 31-liter capacity, providing ample room for a variety of cooking and reheating tasks. Whether you’re preparing a family meal or defrosting food, this microwave ensures that you have the space you need. The unit is designed with a powerful 900-watt microwave output, enabling quick heating and cooking, which is essential for busy lifestyles.

Hotpoint has integrated several innovative technologies into the HM311i, enhancing its usability and efficiency. The inverter technology is a major highlight, allowing for consistent and even cooking results by distributing power more evenly. This means no more cold spots in your food, ensuring that every meal is cooked thoroughly.

Another key feature is the automatic cooking programs. The microwave comes equipped with various pre-set functions that simplify the cooking process. From defrosting to cooking specific dishes, users can select the desired program and let the microwave do the rest. This user-friendly interface ensures that even novice cooks can achieve excellent results with minimal effort.

The HM311i is also designed with ease of use in mind. The intuitive electronic display and control panel make navigation straightforward, while the easy-clean stainless steel interior helps maintain hygiene and reduces the need for extensive cleaning. Additionally, the microwave is fitted with a child lock feature, providing peace of mind for families with young children.

In terms of design, the Hotpoint HM311i boasts a contemporary look that fits well with any kitchen decor. Its built-in design saves counter space, allowing for a more streamlined appearance in the kitchen. It also features a sleek glass door that offers a clear view of the cooking process.

Overall, the Hotpoint HM311i is a reliable and feature-rich microwave that caters to the needs of modern users. With its combination of power, efficiency, and user-friendly design, it stands out as a smart addition to any kitchen setup. Whether you are reheating leftovers or exploring new recipes, this microwave promises to make cooking faster and more enjoyable.