Suggested Uses, Attachment Functions Speed

Suggested Uses

To change the metal attachment blade, remove the attachment already inserted on the shaft of the mixing rod with the tool provided. Use the side of the tool with the semi-circular slot to remove the attachment. Place the slot around the shaft, underneath the attachment, and lift up to remove.

Caution: Blades are sharp. Handle with care.

Attachment	Functions	Speed
Aerator disc	Beat cream, whip egg whites,	Minimum
	puddings, sauces, frostings and other
	airy, foamy mixtures. When using, move
	blending rod up and down to draw air
	in. Use a tall, narrow container for best
	results when foaming milk, making
	cream and whipping egg whites.

Assembly and Use

of Food Chopper Attachment

figure 1	1	Ensure the motor base is unplugged.
figure 1
	2	Assemble chopper bowl by first placing the
		chopping blade onto the blade shaft in the
		chopper bowl. (see figure 1) Then place food in
		bowl. For best results, solid foods should be no
		larger than 1/2" cubes.
	3	Place the chopper bowl lid on top of the
		chopper bowl. (see figure 2)
	4	Attach motor base to top of bowl cover by
	4	Attach motor base to top of bowl cover by
		turning clockwise.
figure 2		turning clockwise.
figure 2
	5	Plug into 120-volt 60 Hz AC only outlet.
	6	Attach the motor base to the chopping bowl

Blending disc

Grinding blade

Multipurpose blade

Mix and stir shakes, drinks, omelet batters, sauces and emulsions. Use for pancake batter, gravies and dressings.

Cut, chop, and crush raw or cooked meat and hard vegetables.Grind cooked meat for use in recipes such as casseroles or chicken salad.

Chop, crush, and mash vegetables, and fruit for baby food, soups and sauces.

Medium to Maximum

Maximum

Medium to Maximum

		as follows: Hold the cover firmly with one hand,
		while holding the motor base with the arrows
		slightly to the right of the arrows on the bowl
		lid. Turn the motor base counter clockwise.
		(see figure 3)
		7 Always use slight downward pressure when
		7 Always use slight downward pressure when
		operating the motor base, while the other hand
	figure 3	operating the motor base, while the other hand
	figure 3	is placed firmly on the bowl cover. Always
		is placed firmly on the bowl cover. Always
		ensure your speed selector is on “5” when
		chopping. Use a pulse action when chopping by
		pressing and releasing ON/OFF switch.
		8 Do not operate the motor continuously for
		more than 15 seconds when using chopper
		attachment, otherwise food will be too
		finely chopped.
		9 When you are finished, simply release the
		ON/OFF switch, unplug the motor base, and
		then unscrew the chopper bowl.