English
ASSEMBLING YOUR CITRUS PRESS
ENSURE THE ON/OFF SELECTOR KNOB IS IN THE OFF POSITION AND THE CITRUS PRESS IS NOT PLUGGED IN WHEN ASSEMBLING.
Remove the small lever pin (B) in the bag attached to the pressing lever (A) - Fig.4.
Holding the black portion of the pressing lever (A) horizontally, slip the silver end of the pressing lever (A) into the notches at the top of the citrus press arm (L). Note the hole on the silver end of the pressing lever (A) should be on the right side - Fig.3.
While holding the pressing lever (A) in place, align the hole on the right side of the lever with the hole in the shaft. Hold the black end of the lever pin (B), and push the lever pin (B) into the hole.
The lever can now be moved up and down.
Put the lever (A) in its upper position.
Rest the lever in the upright position so that the round notches on the center of the underside of the handle are visible. Press the clear splash guard (C) onto the round notches, it will click in place. Align the notches on the black fruit press (D) with the metal bar in the center of the round notches, then turn clockwise one quarter turn to lock into place. Once locked in place, the fruit press (D) cannot be pulled off, but can be moved up and down - Fig.5.
Slip the drip tray (J) and drip tray grid (I) in place - Fig.6.
Rest the lever in the up position. Slide the clear bowl (G) onto the black plastic shaft of the citrus press. Align the clear bowl (G) so that the plastic pouring spout (G1) is on the front, to the left of the center (7:00 position), then turn
Place the pulp filter (F) inside the clear bowl (G) - Fig.8.
Slide the juicing cone onto the center of the black axis in the center of the pulp filter (F) and check that the cone rotates smoothly both clockwise and
10