II. Vented Installation | Whirlpool RJH 3330-1 specification

+“x IO”ELBOW

RAIN CAP

12” HIGH

CABINET

TRANSITION

DUCT

PROVIDED

WITH HOOD

SHELF/

HOOD

Figure 2

II.VENTED INSTALLATION

For ventless installation, Kit RCH3630 must be installed.

A. Assembling and Installing to Wall

1.Select the area for installation, making sure you have an electrical supply available. See the shaded area in Figure 3. This is the area the electrical supply must enter.

ELECTRICAL

INLET AREA \

ON BACK WALL

Figure 3

*When installing the Microshelf Hood in a ventless

installation, this dimension is 16%“. See the instructions with the ventless kit (RCH3630) for details.

CAUTION: Due to the amount of weight the Microshelf Hood must support, you must make sure the Microshelf Hood is mounted to 2 vertical wall studs and into the wall covering which must be at least %” thick sheet rock, with 4 wall anchor bolts.

2.If the Microshelf Hood is mounted to a wall that

does not meet the above recommendations, the weight of the microwave oven may cause the Microshelf Hood to pull away from the wall resulting in personal injury or property damage.

Page 2

NOTE: If the Microshelf Hood is to be installed above a freestanding range, disconnect the power from the range and move the range out of the opening in the cabinets. This will allow for more access to the installation area.

If installing the Microshelf Hood above a built-in cooktop or set-in range, lay a protective cover over the cooktop during the installation. This may help prevent damage to the cooktop (in case you drop something) and it will prevent dust and dirt from accumulating on the cooktop during installation.

3.Mark a line on the back wall 15” down from the upper cabinets 30” long centered between theside cabinets or allotted space. See Figure 3.

4.Locate the 2 wall studs in the area you have

selected for mounting the microwaveoven. IF YOU DO NOT KNOW HOW TO LOCATE A WALL

STUD, CONSULT A LOCAL BUILDING CONTRACTOR FOR HELP.

NOTE: If 2 studs are not located on the line drawn in Figure 3, DO NOT attempt to install the shelf hood.

5.Line the top of the hanging bracket up with the line drawn on the wall in Figure 3. Move the bracket to the left or right within the allotted 30”space until the center line of the 2 studs line up with 4 holes in the hanging bracket. Neither edge of the bracket should be closer than l/2” to the side cabinets or the end of the 30” allotted space. (See Figure 4).

6.Mark and drill four 3/16 dia. pilot holes in the studs for the l/4” dia. x 2” long lag bolts provided.

CLEARANCE

TO CABINET

STUD+	1	-MARK	HOLES-REMOVE
		HANGING	BRACKET		AND
		DRILL	&’ DIA.	HOLE	IN
		II
		+ SHEET	ROCK

Figure 4

7.Mark 2 holes on each end of the hanging bracket. Remove bracket and drill four 7/16” dia. holes.

8.Insert four hollow wall anchor bolts into the four 7/16” dia. holes in thesheet rock. Anchor bolts are provided in installation pack. Rotate anchor bolts screws 5-10 revolutions to hold each anchor bolt in place. These will be completely tightened later. (See Figure 5).

RJH 3330-1 specifications

The Whirlpool RJH 3330-1 is a sophisticated freestanding refrigerator that embodies modern design and advanced technology, making it a standout choice for contemporary kitchens. With a user-centric approach, this model ensures a perfect balance between functionality and aesthetics.

One of the main features of the Whirlpool RJH 3330-1 is its spacious interior. With a total capacity of approximately 336 liters, it provides ample space for storing groceries, beverages, and leftovers. The refrigerator compartment is designed with adjustable shelves, allowing users to customize storage according to their needs. The spacious freezer section also provides ample room for frozen goods, making meal planning and preparation efficient and convenient.

This refrigerator boasts several advanced technologies that enhance its performance. The No Frost system is a notable feature, which eliminates the need for manual defrosting. This technology prevents ice buildup, ensuring optimal airflow and temperature consistency throughout the refrigerator. As a result, food remains fresh for longer periods, ultimately reducing food waste.

Energy efficiency is another key characteristic of the Whirlpool RJH 3330-1. With an impressive energy rating, this model not only helps to lower electricity bills but also contributes positively to the environment. The use of LED lighting further enhances energy savings while providing bright and clear illumination of the interior.

In terms of design, the Whirlpool RJH 3330-1 features a sleek and modern exterior that blends seamlessly with various kitchen decors. The stainless steel finish offers durability and ease of cleaning, while the minimalist handles enhance the appliance's aesthetic appeal.

The cooling system is equipped with advanced temperature controls, allowing users to set optimal temperatures for different food types. This ensures that perishables remain at their best, extending the shelf life of fruits and vegetables.

In conclusion, the Whirlpool RJH 3330-1 combines practicality, efficiency, and style. Its spacious design, energy-saving technologies, and user-friendly features make it an excellent addition to any household. Whether you are a busy family or an individual who values convenience, this refrigerator offers solutions that cater to your modern lifestyle, all while keeping food fresh and organized.