FREEZER - MODELS RZA50
INSTRUCTIONS FOR INSTALLATION & USE
GETTING STARTED:
STEP 1
Choose a location for your freezer, away from any heat sources and allow adequate ventilation - 100mm (4 inches) gap above.
To ensure that your freezer runs reliably and efficiently follow these steps.
STEP 2
Move the freezer into position, using the sides of the cabinet. Take care to avoid damaging the refrigerant circuit pipe work on the rear.
INSTALLATION | SAFETY & |
|
|
STEP 3 |
| STEP 4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CONTROLS |
Level the freezer by adjusting the front feet. This will stop rocking or vibration and keep the door aligned.
NB. The spanner is for illustration only and is not supplied with the freezer.
After the front feet have been adjusted and the freezer is level, fit the left and right hand bottom hinge covers supplied. Align with the cover plate slots and push into position.
USEFUL ADVICE |
STEP 5
Before plugging in and switching on, leave the freezer in its final location for at least 15 minutes to allow it to settle.
STEP 7
If you are freezing fresh food, turn ON fast freeze by pressing the switch 24 hours before placing the food inside. Place the fresh food inside.
Remember to turn fast freeze OFF after 24 hours.
STEP 6
Plug in and switch on. Allow the freezer to cool before placing food inside.
All food in the freezer should be covered.
STEP 8
Your freezer is now working.
If after 24 hours your freezer is not operating as you want, refer to the
TROUBLESHOOTING section.
MAINTENANCE | CLEANING& |
TROUBLESHOOTING |
|
GUARANTEE | SERVICE & |
Read the rest of these instructions to get the best from your appliance
and remember to fill in your guarantee registration.
Keep this Book in a safe place for quick reference.