Using as a Stand Mixer
To attach the Hand Mixer to the Stand, tilt the Stand’s cradle (the top of the Stand that holds the Mixer) back and insert the Mixer’s front into the 2 slots. Then push the back of Mixer until its snaps into place. To remove the Mixer from the Stand, tilt the cradle back then grasp the Mixer firmly with hand and press the Release Button on the bottom of the cradle.
Caution: The Mixer should be unplugged from the electrical outlet and in the “Off”
or “0” position when attaching to — or removing from the Stand.
Raising and Lowering the Mixing Head
Press the head lock button, located on the neck of the Stand Mixer. While the button is depressed, hold the handle and ease the head of the Stand Mixer back, release the button, the Stand Mixer head will lock into this position. To lower the mixing head, press the head lock button. While the button is depressed, hold the handle and ease the head of the stand mixer down. A “click” sound will indicate when the mixing head is securely in position. Be sure the mixer head is securely in position before using.
Make sure the Hand Mixer is firmly attached to the base and the head is firmly down and locked into place before picking up or moving mixer.
Ejecting Beaters
Make sure the speed control is in the “0” position and unplugged from an electrical outlet. Scrape off any excess batter with a rubber spatula. Grasp the stems of the beaters with your hand and press the beater eject button.
Bowl Placement
With Hand Mixer firmly attached, tip back head. Place bowl on the mixer turntable and rotate clockwise to lock bowl into position. To unlock hold turntable and rotate bowl
Caring & Cleaning of Your Mixer
1.Before cleaning any part of the mixer, set the position selector to the “0” position, then unplug the cord from the outlet and eject the beaters. Make sure to wash and dry all
2.The mixer and cord are be cleaned with a damp cloth but the final cleaning must be with a dry cloth. Do not immerse mixer or cord in liquids.
3.To remove stubborn spots, wipe surfaces with a piece of cloth, slightly dampened, in soapy water or a mild,
4.The attachments and bowl may be washed in hot, soapy water or in a dishwasher.
5.Do not use any abrasive cleaner or material to clean any part of the hand mixer, as it can harm the body of the product.
Storage
Store the hand mixer on its heel rest in a clean, dry location such as
a cabinet or shelf. Store beaters in a drawer or assembled on the stand, or assemble on stand and store together.
Maintenance
Other than the recommended cleaning, no further user maintenance
should be necessary. If for any reason your hand mixer should require
repairs, do not try to fix it yourself. Send it to the nearest Authorized
Sunbeam Appliance Service Center.
10 | 11 |