CARE AND MAINTENANCE
Alternate setup method
Using this method you can set up your SoundLink® Air System by first joining its own
Note: Before you start, disconnect power and any cables from your SoundLink Air system.
1.Place your SoundLink Air system in a location where you want to use it.
2.Bring your iPod touch, iPad, iPhone or laptop computer to the same location.
3.Connect the SoundLink Air system to power.
DC POWER
4.Press and hold the Reset button on the bottom of the SoundLink Air System for at least two seconds until the
Amber
Bottom panel
5.Wait until you hear an audio tone (in approximately 30 seconds). Then, continue.
6.On your iPod touch, iPad, iPhone or laptop computer, turn on
7.Open a browser and type: http://192.168.1.1 in the address field. The setup window is displayed on your screen.
English – 15