Bose SOUNDLINK AIR manual Replacing the remote battery

Page 14

CARE AND MAINTENANCE

Replacing the remote battery

When the remote stops operating or its range seems reduced, it is time to change the remote battery.

WARNING: Keep the remote control battery away from children. It may cause a fire or chemical burn if mishandled. Do not recharge, disassemble, heat above 100ºC (212ºF), or incinerate. Dispose of used batteries promptly. Replace only with a battery of the correct type and model number.

WARNING: Danger of explosion if battery is incorrectly replaced. Replace only with an agency-approved (e.g., UL) CR2032 or DL2032 3-volt lithium battery.

1.Using a coin, turn the battery cover slightly counterclockwise.

2.Remove the cover and insert the new battery (CR2032 or DL2032) flat side up, with the + symbol in view.

3.Reseat the cover and turn it clockwise to lock into place.

14 – English

Image 14

Contents SoundLink Air Safety Information Please read this owner’s guideImportant Safety Instructions Safety InformationCanada A. and CanadaContents Introduction Unpacking Using the SoundLink Air you canOverview Connecting the system to power What you needSystem setup Setup window, enter the requested information Moving the system after Wi-Fi setup Listening to an AirPlay compatible device Power on/offControlling the volume To turn the system onListening to a device using AUX Troubleshooting Contacting Customer ServiceReplacing the remote battery Alternate setup method Configuring your network manually Turning on/off Wi-Ficapability Updating system software Power saving modeSoftware update procedure Alternate update method Under Collections, click BonjourOptional battery not included Battery status indicatorCharging the battery Manual battery checkBattery protection mode Packing the power supply for travelingTechnical information Performing a factory resetLimited warranty information Care and Maintenance