Sony DCR-SR87 manual Charging the battery pack, Turn off your camcorder by closing the LCD screen

Getting started

Step 1: Charging the battery pack

CHG (charge) lamp ACCESS lamp (Hard disk)

	Battery pack
DC plug
DC IN jack	AC Adaptor
	Power cord (Mains lead)	To the wall outlet
		(wall socket)

You can charge the “InfoLITHIUM” battery pack (H series) after attaching it to your camcorder.

 You cannot attach any “InfoLITHIUM” battery pack other than the H series to your camcorder.

1 Turn off your camcorder by closing the LCD screen.

2 Attachclicks. the battery pack by sliding it in the direction of the arrow until it

3 Connect the AC Adaptor and the power cord (mains lead) to your camcorder and the wall outlet (wall socket).

Be sure that the  mark on the DC plug is facing down.

The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off when the battery pack is fully charged.

4 When the battery is charged, disconnect the AC Adaptor from the DC IN jack of your camcorder.

See page 52 on charging, recording and playing time.

Getting started

US

13