Hotpoint DX 892 CX S Restoring the factory settings, Standby, Cooling ventilation, Oven light

Page 10

- “Auto” and the duration alternately, if programming is

GB automatic.

4.Press the button to begin cooking.

5.The oven will begin its preheating phase, the preheating indicators will light up as the temperature rises.

6.When the preheating process has finished, a buzzer sounds and all the preheating indicator lights show that this stage has been completed: the food can then be placed in the oven.

7.During cooking it is always possible to:

- modify the temperature by turning the THERMOSTAT knob (manual modes only);

-set the duration of a cooking mode (see Cooking Modes);

-press the button to stop cooking. In this case the appliance stores the temperature modified previously in its memory (manual modes only);

-

switch off the oven by pressing the

button

for 3 seconds.

 

8.If a blackout occurs while the oven is already in operation, an automatic system within the appliance will reactivate the cooking mode from the point at which it was interrupted, provided that the temperature has not dropped below a certain level. Programmed cooking modes which have not yet started will not be restored and must be reprogrammed (for example: a cooking mode has been programmed to start at 20:30. At 19:30 a blackout occurs. When the power supply is restored, the mode will have to be reprogrammed).

!There is no preheating stage for the GRILL mode.

!Never put objects directly on the bottom of the oven; this will prevent the enamel coating from being damaged.

!Always place cookware on the rack(s) provided.

Cooling ventilation

In order to cool down the external temperature of the oven, a cooling fan blows a stream of air between the control panel and the oven door, as well as towards the bottom of the oven door.

!Once cooking has been completed, the cooling fan continues to operate until the oven has cooled down sufficiently.

Oven light

The light comes on when the oven door is opened or when a cooking mode starts.

The button can be used to switch on /switch off the light at any time.

Residual heat indicators

The appliance is fitted with a residual heat indicator. When the oven is off, the “residual heat” bar on the display lights up to indicate high temperatures inside the oven cavity. The individual segments of the bar switch off one by one as the temperature inside the oven falls.

Restoring the factory settings

The oven factory settings can be restored to reset all selections made by the user (clock and customised durations). To carry out a reset, switch off the oven, then keep the SELECTOR knob turned while pressing

the button for 6 seconds. Once the restore procedure is complete, a buzzer will sound. The first

time the button is pressed, the oven will behave as if it is being switched on for the first time.

Standby

This product complies with the requirements of the latest European Directive on the limitation of power consumption of the standby mode. If no buttons are pressed for 30 minutes and the control panel lock has not been activated, the appliance automatically reverts to standby mode. The standby mode is visualised

by the high luminosity “Watch Icon”. As soon as interaction with the machine resumes, the system’s operating mode is restored.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Instructions for Installation and Use Build-in Electric double oven ContentsVery HOT Surfaces Introduction To the InstallerHas been correctly installed To the UserAlways Safety InformationNever Installation Tall Cabinet Ventilation 561mm 562mmDisplay Main parts of your Double OvenOverall view Control panel Available only on certain modelsStart-up and use Setting the clockSetting the minute minder Control panel lockStandby Restoring the factory settingsResidual heat indicators Cooling ventilationManual cooking modes Cooking Modes in your OvenAutomatic cooking modes Pour in the water and yeast mixture Select the manual LOW Temperature functionMake a small well in the mound of flour Knead the dough by stretching and folding it overProgramming cooking Practical cooking adviceSetting the end time for a cooking mode Programming the cooking durationSolarplus Grill Using the grill pan kit ∙ Do not place food or dishes on the floor of the oven Top Oven Conventional CookingTo use the oven proceed as follows Platewarming in the top ovenTop Oven Temperature Charts Meat Meat Pre-heat Temperature Time approxTop Oven Temperature Charts Baking Food Pre-heat Temperature Time in mins Position in OvenMain Oven Intelligent Cooking System Cooking temperature rangesTelescopic runners and Meat pan Cooking Advice Table Main Oven The Intelligent Cooking SystemTemperature Conversion Chart Gas Main Main FanCare and Cleaning Top Oven Sides, Main Oven Sides Rear PanelControl Panel Inner Door Panels & GlassRemove the door inner glass as follows Refit the door inner glass as followsIf something Goes wrong There MAY be Nothing WrongClock button Positions 1 and 5 the direct We recommend switchingDisposal of your product Digits on the display flashGuarantee does not cover Months Parts and Labour GuaranteeGuarantee is subject to the following conditions Year Parts GuaranteeRepublic of Ireland 0818 313 Hotpoint ServiceParts & Accessories Appliance Registration

DX 892 CX S specifications

The Hotpoint DX 892 CX S is a state-of-the-art dishwasher designed to meet the demands of modern households. With an elegant stainless steel finish, it not only enhances kitchen aesthetics but also delivers exceptional performance and efficiency. This versatile appliance boasts a capacity of up to 16 place settings, making it ideal for large families or those who frequently entertain.

One of the standout features of the DX 892 CX S is its advanced cleaning technology. The dishwasher is equipped with Hotpoint’s unique Power Clean Pro system, which uses specially designed jet sprays to target heavily soiled dishes. This ensures that even the toughest baked-on food is removed, providing a sparkling clean every time. Complementing this is the Smart Sensor technology that automatically detects the level of dirt in the load and adjusts the washing cycle accordingly. This leads to not only superior cleaning results but also optimizes water and energy consumption.

The DX 892 CX S is built with flexibility in mind. The adjustable top basket allows for taller items to fit comfortably in the lower basket, while the folding tines provide additional space customization. This means that whether you're washing large pots, delicate glassware, or a mixture of both, this dishwasher can accommodate your needs.

Another significant feature is the Eco Cycle program, which is designed to minimize energy use without compromising on cleaning performance. With an impressive Energy Rating, this model contributes to both environmental sustainability and lower utility bills. Additionally, the dishwasher operates at a whisper-quiet noise level, ensuring a tranquil home environment even during nighttime cycles.

For added convenience, the Hotpoint DX 892 CX S includes a delay timer, allowing you to set the dishwasher to run at a time that best suits your schedule. The intuitive digital display makes selecting programs and monitoring progress easy, ensuring a user-friendly experience.

With its combination of practicality, efficiency, and cutting-edge technology, the Hotpoint DX 892 CX S stands out as an exemplary choice for anyone seeking a reliable and stylish dishwasher solution. It efficiently complements modern lifestyles while ensuring outstanding performance in dish cleaning.
Top Page Image Contents