Hotpoint DX 892 CX S Start-up and use, Control panel lock, Setting the clock, Starting the oven

Page 9

Start-up and use

!The first time you use your appliance, heat the empty oven with its door closed at its maximum temperature for at least 2-3 hours. Ensure that the room is well ventilated before switching the oven off and opening the oven door. The appliance may emit a slightly unpleasant odour caused by protective substances used during the manufacturing process burning away.

!To make the setting process easier, keep the knob in position: this will increase the scrolling speed of the numbers on the display.

!Each setting will automatically be stored in the appliance memory after 10 seconds.

!The touch controls cannot be activated if the user is wearing gloves.

Control panel lock

!The control panel can be locked during the cooking as well as once the cooking has finished.

To lock the oven controls, press and hold the button for at least 2 seconds. A buzzer will sound and the TEMPERATURE display shows the key symbol

“O—n”. The icon will light up to indicate lock activation.

To deactivate the lock, press and hold the button again for at least 2 seconds.

Setting the clock

!The clock can only be set when the oven is switched

off. If the oven is in standby mode, pressing the button once will display the current time setting. Press it again to set the time.

After connection to the power supply network or after

a blackout, the button on the display will flash for 10 seconds.

To set the clock:

1.Press button .

2.Turn the TIMER knob towards “+” and “-” to adjust the hour value.

3.Once you have reached the correct hour value,

press the button.

4.Repeat the above process to set the minutes. If a blackout occurs, it will be necessary to reset

the clock. If the icon flashes on the display, this indicates that the clock has not been set correctly.

Setting the minute minder

GB

!The minute minder may still be set whether the oven is switched on or off. It does not switch the oven on or off.

When the set time has elapsed, the timer emits a buzzer that will automatically stop after 30 seconds or when any active button on the control panel is pressed. To set the minute minder proceed as follows:

1.Press button .

2.Adjust the time as desired by turning the TIMER knob towards “+” and “-”.

3.Once you have reached the desired value, press the

button again.

The lit symbol will remind you that the minute minder is on. The DISPLAY will show the countdown.

To cancel the minute minder, press the button and

use the knob to set the time to 00:00. Press button again.

The icon will switch off to indicate that the minute minder has been disabled.

Starting the oven

1.Switch the control panel on by pressing the button. The appliance buzzer sounds three times (ascending) and all buttons light up in sequence.

2.Select the TOP/GRILL or MAIN oven by pressing the

TOP OVEN/ GRILL or MAIN OVEN icon.

3.Select the desired cooking mode by turning the SELECTOR knob. The display shows:

- the temperature associated with the mode, if programming manually;

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

9

Image 9
Contents Build-in Electric double oven Contents Instructions for Installation and UseVery HOT Surfaces Has been correctly installed To the InstallerIntroduction To the UserSafety Information AlwaysNever Installation Tall Cabinet Ventilation 562mm 561mmOverall view Control panel Main parts of your Double OvenDisplay Available only on certain modelsSetting the minute minder Setting the clockStart-up and use Control panel lockResidual heat indicators Restoring the factory settingsStandby Cooling ventilationCooking Modes in your Oven Manual cooking modesAutomatic cooking modes Make a small well in the mound of flour Select the manual LOW Temperature functionPour in the water and yeast mixture Knead the dough by stretching and folding it overSetting the end time for a cooking mode Practical cooking adviceProgramming cooking Programming the cooking durationSolarplus Grill Using the grill pan kit To use the oven proceed as follows Top Oven Conventional Cooking∙ Do not place food or dishes on the floor of the oven Platewarming in the top ovenMeat Pre-heat Temperature Time approx Top Oven Temperature Charts MeatFood Pre-heat Temperature Time in mins Position in Oven Top Oven Temperature Charts BakingCooking temperature ranges Main Oven Intelligent Cooking SystemTelescopic runners and Meat pan Main Oven The Intelligent Cooking System Cooking Advice TableGas Main Main Fan Temperature Conversion ChartTop Oven Sides, Main Oven Sides Rear Panel Care and CleaningInner Door Panels & Glass Control PanelRefit the door inner glass as follows Remove the door inner glass as followsThere MAY be Nothing Wrong If something Goes wrongDisposal of your product Positions 1 and 5 the direct We recommend switchingClock button Digits on the display flashGuarantee is subject to the following conditions Months Parts and Labour GuaranteeGuarantee does not cover Year Parts GuaranteeParts & Accessories Hotpoint ServiceRepublic of Ireland 0818 313 Appliance Registration

DX 892 CX S specifications

The Hotpoint DX 892 CX S is a state-of-the-art dishwasher designed to meet the demands of modern households. With an elegant stainless steel finish, it not only enhances kitchen aesthetics but also delivers exceptional performance and efficiency. This versatile appliance boasts a capacity of up to 16 place settings, making it ideal for large families or those who frequently entertain.

One of the standout features of the DX 892 CX S is its advanced cleaning technology. The dishwasher is equipped with Hotpoint’s unique Power Clean Pro system, which uses specially designed jet sprays to target heavily soiled dishes. This ensures that even the toughest baked-on food is removed, providing a sparkling clean every time. Complementing this is the Smart Sensor technology that automatically detects the level of dirt in the load and adjusts the washing cycle accordingly. This leads to not only superior cleaning results but also optimizes water and energy consumption.

The DX 892 CX S is built with flexibility in mind. The adjustable top basket allows for taller items to fit comfortably in the lower basket, while the folding tines provide additional space customization. This means that whether you're washing large pots, delicate glassware, or a mixture of both, this dishwasher can accommodate your needs.

Another significant feature is the Eco Cycle program, which is designed to minimize energy use without compromising on cleaning performance. With an impressive Energy Rating, this model contributes to both environmental sustainability and lower utility bills. Additionally, the dishwasher operates at a whisper-quiet noise level, ensuring a tranquil home environment even during nighttime cycles.

For added convenience, the Hotpoint DX 892 CX S includes a delay timer, allowing you to set the dishwasher to run at a time that best suits your schedule. The intuitive digital display makes selecting programs and monitoring progress easy, ensuring a user-friendly experience.

With its combination of practicality, efficiency, and cutting-edge technology, the Hotpoint DX 892 CX S stands out as an exemplary choice for anyone seeking a reliable and stylish dishwasher solution. It efficiently complements modern lifestyles while ensuring outstanding performance in dish cleaning.