Philips 40PFL6605S/98 Change picture and sound settings, Remove devices from the home menu

Watch TV Browse USB Browse PC Scenea

Add your devices

Setup

2 Press the Navigation buttons to select a home menu item:

• [Watch TV]Switches back to the antenna source if another source is selected.

• [Browse USB]Accesses the content

browser of the connected USB storage device.

• (For PFL8605 only)[Browse PC]Accesses the content browser of the connected PC network.

• [Scenea]Switches to the Scenea wallpaper.

• [Add your devices]Adds new devices to the home menu.

• [Setup]Accesses menus to change picture, sound and other settings.

3 Press OK to confirm your choice.

Tip

•• Press (Home) to exit the home menu.

•• Press (Back) to exit the [Setup] menu.

•• Press (Options) to exit an options menu.

Remove devices from the home menu

If a device is no longer connected to the TV, remove it from the home menu.

1 Press (Home).

»» The home menu appears.

2 Press the Navigation buttons to select a device to remove.

3 Press (Options).

»» A list appears, with [Remove this device] selected.

Downloaded From TV-Manual.com Manuals

4	Press OK.
	»» Follow the on-screen instructions to		gl i s h
	remove the device. Once complete, the
	device is removed from the home menu.		E n
Access the browse menu
1	When watching TV, press (Browse).
2	»» The browse menu appears.
	Press	to select:
	• [Channel list] Accesses TV channel list.
3	• [Teletext] Accesses teletext.
	Press OK to confirm your choice.

Change picture and sound settings

Change picture and sound settings to suit your preferences.You can apply pre-defined settings or change settings manually.

Note

•• The flexibility to change settings is limited if the TV location is set to [Shop] mode. Set the TV location to [Home] mode to access all TV settings (see ‘Change TV preferences’ on page 24).

Use settings assistant

Use the settings assistant to guide you through the picture and sound settings.

1 When watching TV, press (Home). »» The home menu appears.

2 Press the Navigation buttons to select [Setup], then press OK.

3 Select [Personalise picture and sound], then press OK.

»» A message appears prompting you to start the settings assistant.

4 Select [Start] and press OK.

»» Follow the on-screen instructions.

EN 11