NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual

Table C-14 Advanced IP Setting (continued)s

Task

Command

 

 

Set the Secondary DNS Server

set dhcp-server dns2 <ip_address>

Set the Primary WINS Server

set dhcp-server wins1 <ip_address>

Set the Secondary WINS Server

set dhcp-server wins1 <ip_address>

Set the Lease

set dhcp-server lease <seconds>

Hotspot Settings

The commands in Table C-15correspond to the Hotspot Settings page on the Web UI under the Advanced heading.

Table C-15 Hotspot Settings

Task

Command

 

 

View all HTTP redirect information

get http-redirect

Enable HTTP Redirect

set http-redirect status up

Disable HTTP Redirect

set portal status down

Set the URL for the redirect

set http-redirect url <url>

Advanced Wireless Settings

The commands in Table C-16correspond to the Wireless Settings page on the Web UI under the Advanced heading. For information about the configuration options in this section, see “Configuring Advanced Wireless Settings” on page 4-3.

Table C-16 Advanced Wireless Settings

Task

Command

 

 

Enable Super-G Mode

set radio wlan0 super-ag yes

Disable Super-G Mode

set radio wlan0 super-ag no

Set the RTS Threshold

set radio wlan0 rts-threshold <0-2347>

Set the Fragmentation Length

set radio wlan0 fragmentation-threshold <256-2346>

Threshold

 

Set the Beacon Interval

set radio wlan0 beacon-interval <20-1000>

 

 

Command Line Reference

C-17

v1.0, May 2006

Page 99
Image 99
NETGEAR WG302v2 manual Hotspot Settings, Advanced Wireless Settings