NETGEAR WG302v2 Set vap vap0 with radio Wlan0 status up, Set interface wlan0vap0 Ssid ssidname

NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual

The commands in Table C-9correspond to the Security Profile Settings page on the Web UI. The commands in this table show how to configure Security Profile 1, which is the default profile and has a default profile name of NETGEAR.

Note: The commands in Table C-9configure the default security profile, which is vap0 on radio wlan0. To configure other security profiles, use vapx, where x is the VAP

ID associated with the security profile.

Table C-9 Security Profile Settings

Task Command

Enable a security profile	set vap vap0 with radio	wlan0 status up
Disable a security profile	set vap vap0 with radio	wlan0 status down
Set the security profile name	set vap vap0 with radio wlan0 profile <name>
Set the SSID of the security	set interface wlan0vap0	ssid <ssid_name>
profile
Broadcast wireless network	set bss wlan0bssvap0 ignore-broadcast-ssid off
name.
Do not broadcast wireless	set bss wlan0bssvap0 ignore-broadcast-ssid on
network name.
Set Network Authentication to	set interface wlan0 security plain-text
Open System
Set Network Authentication to	set interface wlan0 security static-wep
Shared Key
Set the Data Encryption to 64-bit	set interface wlan0vap0	wep-key-length 40
WEP
Set the Data Encryption to 128-bit	set interface wlan0vap0	wep-key-length 104
WEP
Set the Key Type to ASCII	set interface wlan0vap0	wep-key-ascii yes
Set the Data Encryption to 152-bit	set interface wlan0vap0	wep-key-length 128
WEP
Set the Key Type to Hex:	set interface wlan0vap0	wep-key-ascii no

C-10 Command Line Reference

v1.0, May 2006