NETGEAR WG302v2 manual Configuring Security Profile Settings

NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual

Table C-7 Wireless Setting (continued)s

Task Command

Configure the Wireless Network	set interface wlan0 ssid <ssid_name>
Name (SSID)	Example:
	set interface wlan0 ssid test_lab
Allow SSID Broadcasts	set bss wlan0bssvap0 ignore-broadcast-ssid off
Deny SSID Broadcasts	set bss wlan0bssvap0 ignore-broadcast-ssid on
Set the Wireless Mode	set radio wlan0 mode g
	set radio wlan0 mode b
Set the Channel/Frequency	Not permitted
Set the Data Rate	get supported-rate wlan0
	add supported-rate wlan0 <rate>
	remove supported-rate wlan0 <rate>
Set the Output Power	set radio wlan0 tx-power <percent>

Configuring Security Profile Settings

You can configure up to eight security profiles on the AP. Table C-8maps the Web UI security profile for wlan0 to the profile name in the CLI.

Table C-8 Security Profile Interface Names

Web UI Security Profile	Default Profile Name	CLI Name
Profile 1	NETGEAR	vap0
Profile 2	NETGEAR-1	vap1
Profile 3	NETGEAR-2	vap2
Profile 4	NETGEAR-3	vap3
Profile 5	NETGEAR-4	vap4
Profile 6	NETGEAR-5	vap5
Profile 7	NETGEAR-6	vap6
Profile 8	NETGEAR-7	vap7

Command Line Reference C-9

v1.0, May 2006