NETGEAR WG302v2 Set bss wlan0bssvap0 dtim-period, Set radio wlan0 wme on, Set radio wlan0 wme off

NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual

Table C-16 Advanced Wireless Settings (continued)

Task Command

Set the DTIM Interval	set bss wlan0bssvap0 dtim-period <1-255>
Enable Wi-Fi Multimedia	set radio wlan0 wme on
(WMM)
Disable Wi-Fi Multimedia	set radio wlan0 wme off
(WMM)
View QoS queue parameters	get tx-queue
AP EDCA parameters
Set AIFS on AP-to-station	set tx-queue wlan0 with queue <Queue_Name> to
traffic	aifs <AIFS_Value>
	Example:
	set tx-queue wlan0 with queue data0 to aifs 13
Set cwMin and cwMax on	set tx-queue wlan0 with queue <Queue_Name> to
AP-to-station traffic	cwmin <cwmin_Value> cwmax <cwmax_Value>
	Example:
	set tx-queue wlan0 with queue data1 cwmin 15
	cwmax 31
Set Max. Burst on	set tx-queue wlan0 with queue <Queue_Name> to
AP-to-station traffic	burst <burst_Value>
	Example:
	set tx-queue wlan0 with queue data2 to burst 0.5
Station EDCA parameters
Set AIFS on station-to-AP	set wme-queue wlan0 with queue <Queue_Name>
traffic	to aifs <AIFS_Value>
	Example:
	set wme-queue wlan0 with queue vo to aifs 14
Set cwMin and cwMax on	set wme-queue wlan0 with queue <Queue_Name>
station-to-AP traffic	to cwmin <cwmin_Value> cwmax <cwmax_Value>
	Example:
	set wme-queue wlan0 with queue vi cwmin 7 cwmax 15
Set TXOP Limit on	set wme-queue wlan0 with queue <Queue_Name>
station-to-AP traffic	to txop-limit <txop-limit_Value>
	Example:
	set wme-queue wlan0 with queue vo to
	txop-limit 49

C-18 Command Line Reference

v1.0, May 2006