NETGEAR WG302v2 manual Configuring Wireless Settings

NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual

Table C-6 Basic Setting (continued)s

Task Command

Set the Primary DNS Server	set host static-dns-1 <ip_address>
	Example:
	set host static-dns-1 10.10.3.10
Set the Secondary DNS Server	set host static-dns-2 <ip_address>
Enable Spanning Tree Protocol	set interface brvlan1 stp on
Disable Spanning Tree Protocol	set interface brvlan1 stp off
Set the Management VLAN ID	set management vlan-id <1-4096>
Enable Untagged VLANs and set	set untagged-vlan untagged-vlan-id <1-4096>
the VLAN ID
Set the Time Zone	set ntp timezone <timezone>
Enable the NTP Server	set ntp status up
Disable the NTP Server	set ntp status down
Use a custom NTP server	set ntp use-default-servers off
Use the default NTP server	set ntp use-default-servers on
Set the Hostname or IP Address	set ntp-servers [primary secondary] server
for the custom NTP server	[<hostname> <ip_address>]
	Example:
Note: You can set a primary and	set ntp-serves primary ntp.foo.com
secondary NTP server.	or
	set ntp-servers primary server 192.168.1.10
View the Current Time	date

Configuring Wireless Settings

The commands in Table C-7correspond to the Wireless Settings page on the Web UI.

Table C-7 Wireless Setting s

Task Command

Turn on the Radio	set interface	wlan0	status up
Turn off the Radio	set interface	wlan0	status down
C-8			Command Line Reference

v1.0, May 2006