3–52 Configuring the Printer
Option Parameter Comments
Font Set 0 *
1
2
3
4
5
6
7
8
9
10
11
0 = US ASCII
1 = German
2 = Swedish
3 = Danish
4 = Norwegian
5 = Finnish
6 = English
7 = Dutch
8 = French
9 = Spanish
10 = Italian
11 = Turkish
Host Form Length DISABLE
ENABLE*
DISABLE turns off the feature that uses the form length
command ^L or ^H to set the page length for the printer.
ENABLE sets the printer page size to equal the form
length, which was set by ^L or ^H.
Ignore Chars DISABLE *
Char 1
Char 2
Char 1 & 2
Enables/disables the ignore function for Character #1
and/or Character #2.
Ignore
Character #1
0 – 255
decimal
0 *
Specifies a decimal character sent by the host to be ig-
nored by the IGP/VGL. Select the appropriate decimal
value for the character to ignore from Appendix D (0 –
127).
Ignore
Character #2
0 – 255
decimal
0 *
Specifies a second decimal character sent by the host to
be ignored by the IGP/VGL. Select the appropriate deci-
mal value for the character to ignore from Appendix D (0
– 127).
Ignore Dots DISABLE *
ENABLE
Enable causes the IGP/VGL to expect position values to
be specified only in 1/10ths of an inch. If the dot position
is also given, it is treated as text.
Ignore Spaces DISABLE *
ENABLE
When disabled, trailing spaces are NOT deleted from
alphanumeric elements in a graphics pass.
When enabled, trailing spaces are deleted from alphanu-
meric elements in a graphics pass.