3–55Configuring the Printer
Option Parameter Comments
Uniform Fonts DISABLE *
ENABLE
When disabled, the typeface selected while in Extended
Graphics mode will be cancelled when the graphics pass
is complete.
When enabled, a typeface selected while in Extended
Graphics mode will also be used in Standard Graphics
mode and Normal mode.
Var Ratio Barcd Low Resolution *
High Resolution
The Variable Ratio Bar Code determines if standard Vari-
able Ratio Barcode command dot values (e.g., ^Bxy9 &
^IBARC,type,R) will be interpreted as 60 dpi P-Series
dots (Low Resolution) or as print engine dots (High Reso-
lution).
Table 3–5. Other IGP/VGL-related Parameters
Option Parameter Comments
Left Margin 0–99.99 Available from LP+ sub-menu. This option can
also be set by using the ^IPAGE,MARGIN
command.
Top Margin 0–99.99 Available from LP+ sub-menu. This option can
also be set by using the ^IPAGE,MARGIN
command.
Bottom Margin 0–99.99 Available from LP+ sub-menu. This option can
also be set by using the ^IPAGE,MARGIN
command.
Orientation Portrait*
Landscape/
Inv. Portrait/
Inv. Landscape
Available from LP+ sub-menu. This option can
also be set by using the ^IPAGE,PORT
(LAND, etc...) command.