A–2 Specifications
Fonts
Resident Fonts: Courier and Letter Gothic scaleable outline fonts
and bit-mapped OCR-A, OCR-B.
Optional Fonts: A wide selection of scaleable outline proportional
and monospace fonts is available
Font Expansion All fonts expandable vertically and horizontally.
Bar Codes: Code 39, Interleaved 2 of 5, Code 128 (subsets A,
B, and C), Codabar
, UPC-A, UPC-E,
UPC 2- & 5-digit addendums, EAN-8, EAN-13,
EAN 2- & 5-digit addendums, Code 93, MSI
Plessey, UPCSHIP (IGP/VGL only), UCC 128,
Postnet, PDF 417 (IGP/PGL only), FIM
Media
Type: Roll-fed, die-cut continuous or fan-fold labels, tags
or tickets; most direct thermal or thermal
transfer materials
Supply Roll: 8 in (203 mm) maximum diameter on 3-in (76 mm)
diameter cores
Optional Internal
Rewind: Accepts full 8 in roll of label or label backing.
Rewind spindle accepts 1.5-in or 3-in diameter cores
Label Material: Thermal transfer plain-coated papers, vinyl, Mylar,
metallized paper, non-woven fabric, fine woven
fabric, thermal-visible light scannable paper,
infrared scannable paper, thermal ticket/tag stock,
thermally sensitive plastic stock
Thermal Transfer
Ribbons: Standard widths are:
T3306 – 60 mm, 80 mm, 110 mm, 130 mm;
145 mm, and 165 mm ; 1476 ft. (450 m)
in length
T3308 – 80 mm, 110 mm, 130 mm, 145 mm,
165 mm, 190 mm and 217 mm; 1476 ft (450 m)
in length
Media Sensing: Moveable “see-through” for die-cut labels and
reflective for tags with black striping
NOTE:
The reflective sensor mark must be
carbon based. The sensor is infrared and will not
reflect off of a plain black mark.