A–4 Specifications
Lists of Approved Media
For a current list of approved standard media for use in Printronix thermal and
thermal transfer label printers, please call Printronix at (800) 733–1900 or FAX
(714) 476–2135. Further information can be obtained by calling the Printronix
Thermaline Help Desk at (714) 221–2488 or from the Printronix Web Page at
http://www.printronix.com.
Indicators and Switches
Indicator Lights:
POWER, RIBBON/MEDIA, ON LINE/P
AUSE
Switches: POWER
Keys:
ON LINE/P
AUSE, FEED, CANCEL
Message Display: 32 characters for error messages, print status,
and recalling stored formats
Host Interfacing
(1) Serial RS–232 or RS–422 at 300, 600, 1200,
2400, 4800, 9600, or 19,200 baud.
(2) Parallel (Centronics compatible).
(3) Coax/Twinax optional.
The RS–232 and RS–422 host interfaces shall have the following characteristics:
Character Set: ANSI ASCII character set
Word Length: Selectable 7-bit or 8-bit data format
Handshaking: XON/XOFF (in receive mode only) and CTS/DTR
Input Buffer: Approximately 7000 bytes. XOFF is transmitted and
DTR goes low when 750 bytes are available in
the buffer. XON is transmitted and DTR goes
high when 750 bytes are left in the buffer.
Characters are transmitted with no parity from
the printer
Electrical
Power Source: 115/230 VAC 50/60Hz Auto-ranging, switching
power supply
Circuit Protection: Two 8-amp, 250V slo-blo fuses
Grounding: Unit must be connected to a properly grounded
receptacle