3–14 Configuring the Printer
d. Press
e. Press or until the following displays:
CONFIG. CONTROL
Load Config.
f. Press
g. Press or to cycle through the options (1–8). Note
that “0” is the default configuration and cannot be altered.
h. When the desired number displays, press to select it. The
following message is displayed while loading.
STANDBY . . .
Then, the following message displays when it is loaded:
Load Config.
X *
2. Move through the menu and change all the desired values. (In this
example, you would change the value from Serial to Parallel.)
3. Press the key to save each new value. An asterisk (*) displays.
4. Before saving the modified configuration, you must delete the original
configuration if the Protect Save CFG option is enabled.
a. Press ON LINE/
PAUSE to take the printer off line.
OFF LINE
IMPACT PRINTER