NETGEAR WG302v2 manual Access Control

NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual

Table C-10 RADIUS Server Settings (continued)

Task	Command
Set the Port Number of the Pri-	set radius-client
mary Accounting Server	primary-accounting-port <port_number>
Set the Shared Secret for the	set radius-client
Primary Accounting Server	primary-accounting-key <value>
Set the IP Address of the Sec-	set radius-client
ondary Accounting Server	secondary-accounting-server <ip_address>
Set the Port Number of the Sec-	set radius-client
ondary Accounting Server	secondary-accounting-port <port_number>
Set the Shared Secret for the	set radius-client
Secondary Accounting Server	secondary-accounting-key <value>

Access Control

The commands in Table C-11correspond to the Access Control page on the Web UI.

Table C-11 Access Control Settings

Task	Command
View a list of wireless clients	get association station
by MAC address
Create a list of clients to permit	set bss wlan0bssvap0 mac-acl-mode accept-list
access to the AP
Add a client to the Trusted	add mac-acl wlan0bssvap0 mac <mac_address>
Wireless Stations list	Example:
	add mac-acl wlan0bssvap0 mac 00:01:02:03:04:05
	add mac-acl wlan0bssvap0 mac 00:01:02:03:04:06
Remove a client from the	remove mac-acl wlan0bssvap0 mac <mac_address>
Trusted Wireless Stations list
Disable MAC Access Control	remove mac-acl all
(remove all clients from the
list)

Command Line Reference C-13

v1.0, May 2006