NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual

3.Select the Security Profile to configure and click Edit.

The Security Profile Configuration page appears, as shown below.

Selected

Security Profile

Figure 2-7

4.Enter the settings for the Security Profile, which are described on the following page.

5.To update the settings, click Apply.

Note: If you use a wireless computer to configure Security Profile settings, and if your computer uses the Security Profile that you change, you will be

disconnected when you click Apply. Reconfigure your wireless adapter to match the new settings or access the wireless access point from a wired computer to make any further changes.

2-14

Basic Installation and Configuration

v1.0, May 2006

Page 36
Image 36
NETGEAR WG302v2 manual Selected Security Profile