NETGEAR WG302v2 manual Rear Panel

NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual

LED	Description
802.11g WLAN	Wireless LAN Link Activity Indicator (2.4 MHz)
	Off		No wireless link activity.
	Green Blink		Wireless link activity.
Rear Panel
	1				1
		1	3	4
	2				5

Figure 0-2

The numbers in Figure 0-2correspond to the following features on the back of the WG302v2:

1.Primary and Secondary 2.4 GHz detachable antennas.

2.Reset button. This restores the default factory settings.

3.Serial Console Port. Use the male DB-9 serial port for serial DTE connections.

4.RJ-45 Ethernet LAN/POE Port. Use the WG302v2 Ethernet RJ-45 port to connect to an Ethernet LAN through a device such as a hub, switch, router, or Power Over Ethernet (POE) switch.

5.Power socket. This connects to the WG302v2 power adapter.

1-6 Introduction

v1.0, May 2006