NETGEAR WG302v2 manual Feature Description Remote Management, Dhcp Server Settings, Other Settings

NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual

Table B-1 Access Point Default Configuration Settings

Feature		Description
Remote Management
	SSH	Enabled
	SNMP	Enabled
	Public Community Name	public
	Private Community Name	private
	Community Name for Traps	NETGEAR WG302v2
	IP Address to Receive Traps	0.0.0.0
DHCP Server Settings
	DHCP Server	Disabled
	Starting IP Address	192.168.0.2
	Ending IP Address	192.168.0.50
	Netmask	255.255.255.0
	Lease	86400 Seconds (1 Day)
Wireless LAN Parameters
	Super-G Mode	Disabled
	RTS Threshold	2,346
	Fragmentation Length	2,346
	Beacon Interval	100
	DTIM Interval	1
	WMM Support	Disabled
	SpectraLink Support	Disabled
Other Settings
	MAC Access Control	Disabled
	Rogue AP Detection	Disabled
	Activity Log	Disabled
	HTTP Redirect	Disabled
	Wireless Bridging and Repeating	Disabled

*Maximum Wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.

Specifications B-3

v1.0, May 2006