Hotpoint BG05 manual Something Wrong ?, If the Ignition does not Work

Page 8

FP087-01 HP Gas Hob (BG05) 12/09/2001 4:59 pm Page 8

SOMETHING WRONG ?

IF THE IGNITION DOES NOT WORK

Is the electricity switched on?

If the electricity supply has failed, the burners can be lit with a match.

If only a hotplate burner is failing to ignite, check that the burner body and cap are seated correctly and that the slots in the burner body are not blocked (see care and cleaning).

May we wish you many years of carefree successful cooking.

Disposal of your product

To minimise the risk of injury to children please dispose of your product carefully and safely. Remove all doors and lids (where fitted). Remove the mains cable (where fitted) by cutting off flush with the appliance and always ensure that no plug is left in a condition where it could be connected to the electricity supply.

To help the environment, Local Authority instructions should be followed for the disposal of you product.

This appliance conforms to the following EEC Directives:

Low Voltage Equipment

Gas Appliances

73/23/EEC

90/396/EEC

93/68/EEC

93/68/EEC

Electromagnetic Compatibility

 

89/336/EEC

 

92/31/EEC

 

93/68/EEC

 

8

Image 8
Contents Instructions for Installation USE Gas Hob BG05 Contents Introduction Always For Your SafetySafety Advice Never Using the GAS HOB Features Operation When Using the GAS HOBCare and Cleaning Something Wrong ? If the Ignition does not WorkInstallation electrical requirements Installation Instructions Gas Category II2H3+ GB,IEProvision for Ventilation GAS Safety Installation & USE RegulationsLocation Fitting the HOB InstallationSiting the HOB Fixing Clamp LPG Conversion Instructions for Models W810, BG05 Hotpoint Service Cover Key Contacts