Before Using the Oven

These instructions are only valid for the destination countries whose identification symbols are shown on the back cover of the appliance instruction booklet.

To make the most of your new oven, read the users instructions carefully and keep them on hand for consulting in the future.

Remove the cardboard protection and the protective plastic film.

Remove the accessories from the oven and heat it at the maximum temperature setting for about 30 minutes to eliminate the bad smell of protective grease and insulating materials. Keep the window open during this operation.

Make sure that the electrical wires of other electrical appliances near the cooktop or the oven do not come into contact with hot parts and do not become entrapped in the oven door.

Your oven is equipped with a fan designed to cool internal parts of the cabinet and the oven components. The fan creates a gentle flow of air, which comes out the steam vent located below the control panel. The cooling system starts working immediately while it can stop immediately after the oven is switched off or from 10 to 30 minutes later (depending on the oven temperatures). In the event of malfunction of the cooling fan, do not use the oven. Contact the after-sales Service.

In case of interruption of the electricity supply, do not use the appliance;

if it happens during the use of the appliance, switch off the appliance and do not use it. It is possible for the inside of the glass in the oven door to cloud up during cooking. Do not rest heavy weights on the door because these could damage the oven cavity and the hinges.

Do not obstruct cooling openings or slots or the fume exhaust.

If turning the oven burner knob becomes difficult, contact the After Sales Service for replacement.