Hotpoint SY23 manual Replacing the Oven Light, Cleaning the Side Guides fig

Page 18

GB

CLEANING THE SIDE GUIDES (fig. 2) (fig. 6)

The appliance can be equipped with side guides which have to be fixed on the oven sides.

Slide oven shelves and trays on side guides.

The side guides can be removed by a light downwards pressure on device A.

3XOO

3XVK

Fig. 6

REPLACING THE OVEN LIGHT (fig.7)3)

(Not covered by the appliance warranty)

Disconnect the appliance from the electricity supply, remove the oven door (as described previously) as well as the oven shelves.

Remove the protective glass light- cover by twisting anti-clockwise.

Unscrew the old bulb and discard Fig. 7 safely, replace with the type

specified in the Technical Data and refit the cover.

NOTE – The glass cover may be tight and may therefore require a tight grip to release.

17

Image 18
Contents Instructions for Installation and Use Declaration of CE Compliance This Product WAS Designed for Home USE Preparation of the oven and pre-use Instructions for Installation Installation Scheme Installation Installation locationElectrical Connection Page Do not USE Open Flames When Searching for GAS Leaks Adapting to the gas in use Changing the grill burner injector figAdjusting the minimum Before Using the Oven Switching the GAS Oven on During oven operationSwitching the GAS Grill on During grill operationElectronic Clock Cleaning the Appliance Removing the Oven Door Cleaning the Side Guides fig Replacing the Oven LightInstructions for Installing Knob Guard Page Cod